Sweep Noise in GSSL with turbo
« on: October 31, 2012, 07:35:03 PM »
Hi Guys,
I have a problem with my Gssl that's working well since two years.

There is an occasional sweep noise on both channel in same time . this noise change in frequencies when i turn the Threshold control and after diseapper.

It seem's coming from the sidechain section.
The noise stop when i unplug the -12v 0v +12v connector of the turbo board or if i remove one of the two LF347 or the LF353

I recorded this noise, you can hear  it here:

https://www.yousendit.com/download/WUJhZEUzT2JLVlVkVU1UQw

Anyone have an idea?

Thanks

Marc
« Last Edit: November 02, 2012, 03:47:36 AM by marcfrom »


Re: Sweep Noise in GSSL with turbo
« Reply #1 on: November 02, 2012, 03:45:31 AM »
The problem is solved now. Actually it was a bad working TL7812.



 

Related Topics

  Subject / Started by Replies Last post
6 Replies
3310 Views
Last post January 03, 2006, 02:57:11 PM
by CJ
9 Replies
2824 Views
Last post November 22, 2004, 08:11:07 AM
by StephenGiles
21 Replies
8574 Views
Last post December 04, 2006, 10:24:29 PM
by Freq Band
7 Replies
4441 Views
Last post July 03, 2006, 01:32:49 PM
by Boswell