PCB Grinder - Parts, projects & PCBs for DIY audio
« on: September 18, 2012, 07:32:45 AM »
Projects, parts and PCBs for DIY - www.pcbgrinder.com


Gustav
« Last Edit: March 31, 2016, 04:31:53 AM by Gustav »


Re: www.pcbgrinder.com
« Reply #1 on: September 23, 2012, 08:12:21 AM »
I managed to negotiate a better deal on shipping and updated the site to reflect this.

Gustav

Re: www.pcbgrinder.com
« Reply #2 on: September 24, 2012, 09:57:38 AM »
Hi,

Can you make pcb for the S800 EQ (trident S80b) project ?

It will be great !

Re: www.pcbgrinder.com
« Reply #3 on: September 24, 2012, 10:16:31 AM »
Hi,

Can you make pcb for the S800 EQ (trident S80b) project ?

It will be great !

As long as  there's sufficient interest and enough info to build a new project, I can provide the PCB - if you provide gerbers and give me permission to sell them.

Gustav
« Last Edit: September 25, 2012, 11:10:30 AM by Gustav »

Re: www.pcbgrinder.com
« Reply #4 on: September 24, 2012, 01:28:19 PM »
It's not my project, the thread is here (http://www.groupdiy.com/index.php?topic=29759.0) but I don't know if there's a gerber file...

Re: www.pcbgrinder.com
« Reply #5 on: September 24, 2012, 03:05:30 PM »
It's not my project, the thread is here (http://www.groupdiy.com/index.php?topic=29759.0) but I don't know if there's a gerber file...

Looks like it's PeterC's project. I would contact him if I were you.

Gustav

Re: www.pcbgrinder.com
« Reply #6 on: September 28, 2012, 07:33:37 AM »
As a general reference based on the mails I receive - I will always need a gerber-file and permission from the person who drew up a project to manufacture and sell it.

Have a nice weekend
Gustav

useme2305

Re: www.pcbgrinder.com
« Reply #7 on: September 28, 2012, 01:56:29 PM »
i'm not deep enough into this community (yet) to know but is there a chance that you will be able to distribute the Nite EQ? i have no idea who drew the project or what a gerber is but i'm sure someone who's reading this right now does and can get the ball rolling?

Re: www.pcbgrinder.com
« Reply #8 on: September 29, 2012, 08:05:02 AM »
i'm not deep enough into this community (yet) to know but is there a chance that you will be able to distribute the Nite EQ? i have no idea who drew the project or what a gerber is but i'm sure someone who's reading this right now does and can get the ball rolling?

Another one of Peters projects, which I did ask him about - I never heard back from him, so I have no permission to make them.

Gustav

synnys

Re: www.pcbgrinder.com
« Reply #9 on: October 02, 2012, 09:04:19 AM »
how about all of the yusynth modules... http://yusynth.net/Modular/index_en.html

that would be awesome!!


Re: www.pcbgrinder.com
« Reply #10 on: October 04, 2012, 02:36:48 AM »
how about all of the yusynth modules... http://yusynth.net/Modular/index_en.html

that would be awesome!!

I would have to obtain permission from whoever designed the PCBs - and the gerber files.

Gustav

Re: www.pcbgrinder.com
« Reply #11 on: October 08, 2012, 11:02:04 AM »
If anyone wants to offer basic components-packages for any of the projects, please let me know. I get a lot of questions asking for basic kits, but I would prefer to stick to the PCB myself and link to someone else offering.

Gustav

burglar

Re: www.pcbgrinder.com
« Reply #12 on: October 08, 2012, 04:24:30 PM »

You can put me down for the trident eq if you do it. 

Re: www.pcbgrinder.com
« Reply #13 on: October 09, 2012, 05:08:14 AM »

You can put me down for the trident eq if you do it.

I would need Gerber-files and PeterC's permission, which I do not have - I assume he will offer these boards himself again, so I wouldn't worry too much if I were you.

Ideas are very welcome, but requesting boards that someone else designed and sells is a dead end.

Gustav

Slenderchap

Re: www.pcbgrinder.com
« Reply #14 on: October 09, 2012, 07:17:03 AM »
i'm not deep enough into this community (yet) to know but is there a chance that you will be able to distribute the Nite EQ? i have no idea who drew the project or what a gerber is but i'm sure someone who's reading this right now does and can get the ball rolling?

If it is of any interest, I did a 500 series version of the Nite EQ a few years ago;
http://www.groupdiy.com/index.php?topic=19789.msg444668#msg444668

Colin.
www.audiomaintenance.com

Re: www.pcbgrinder.com
« Reply #15 on: October 09, 2012, 10:58:26 AM »
i'm not deep enough into this community (yet) to know but is there a chance that you will be able to distribute the Nite EQ? i have no idea who drew the project or what a gerber is but i'm sure someone who's reading this right now does and can get the ball rolling?

If it is of any interest, I did a 500 series version of the Nite EQ a few years ago;
http://www.groupdiy.com/index.php?topic=19789.msg444668#msg444668

Colin.
www.audiomaintenance.com

Looks like it was early days of the 500 series in DIY-world.

I'll get the ball rolling on it during the weekend, and please let me know if you want a prototype and/or have any parts for the build I should put a link up to.

Also, just to make absolutely sure - this is the latest revision? http://www.audiomaintenance.com/downloads/prodigy_nite500_electrical.zip

Gustav
« Last Edit: October 09, 2012, 11:12:05 AM by Gustav »

useme2305

Re: www.pcbgrinder.com
« Reply #16 on: October 09, 2012, 02:34:41 PM »
a finally. so this is one channel of nite eq in two 500 series spaces?

if so, is there any chance to make this fit in one 500 sereies space instead of two with today's advanced DIY 500 series knowledge? =D

Re: www.pcbgrinder.com
« Reply #17 on: October 10, 2012, 08:37:38 AM »
is there any chance to make this fit in one 500 sereies space instead of two with today's advanced DIY 500 series knowledge? =D

The project will be offered as per Colin's design :)

I have received the production files from Colin, and it will take a little time before I have completed a prototype, checked with Colin and manufactured a batch for sale. If everything is smooth, I image it could be for sale in 3-4 weeks.

Gustav

spase

Re: www.pcbgrinder.com
« Reply #18 on: October 10, 2012, 12:31:03 PM »
I would love to have a couple of those colins 1073 blank boards 19 inch or 500 series whatever

Slenderchap

Re: www.pcbgrinder.com
« Reply #19 on: October 10, 2012, 01:17:21 PM »
I would love to have a couple of those colins 1073 blank boards 19 inch or 500 series whatever

Blank PCB's for the ez1073 or ez1073-500 are not available.

Colin
www.audiomaintenance.com