PCB Grinder - New site, new guides

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If you look carefully it has the 51x edge card connector on the back! the yellow pcb.
So i guess its a normal rack pcb.

 
okgb said:
that was the LA-4's fit into a 500  or there is a 500 option  ??? 
Looks great btw

was trying to quote the pic ,

LA4 fit into 500 series format.

Gustav
 
okgb said:
that was the LA-4's fit into a 500  or there is a 500 option  ??? 
Looks great btw

was trying to quote the pic ,

Hi,

Because the power supply section is separate from the signal section it can be cut off, this allows the board to fit in 500-format.  If you have vu-meters then a further section can be removed to allow the board and vu to fit.  This may help a bit:

tumblr_inline_misobbLnYV1qz4rgp.jpg


You can see the process here: http://irfrench.tumblr.com/post/44459601218/la4-51x-you-seem-to-misunderstand-us

Cheers,
Ian
 
Truly excellent work, Ian.

Maybe I'll learn enough to do a 500 series layout based on your idea before the end of 2013 :)

Gustav
 
Working on a new kit for the 1176.

10% off on the GssL this week..

Gustav
 
okgb said:
Again  , nice work Ian and thanks for the tips , now I gotta order more boards !

I have my eye on that LA4..it could do with a little update, but that will probably take many months.

Gustav
 
Hello Gustav,

Just ordered 1 4k5 and  9k5

Order I.D. 1237
 
Toure14 said:
Hello Gustav,

Just ordered 1 4k5 and  9k5

Order I.D. 1237

Sorry I didn't reply in here, haven't checked for some days.

It's been taken care of :)

Gustav
 
https://pcbgrinder.com

Added a new Project from Slenderchap/Audio Maintenance

Gustav
 
What's the story with the ezATM project? What is it? It looks like its not the ezHLF pultec filter, but rather something else?
 
wolan42 said:
hello gato,

I think it is something like the 3D "AIR" EQ or Nite EQ.
But I am not shure.

That was the inspiration..

Gustav
 
Niketouille said:
Hi,
Is there any front panel design for the EZAK5 eq ?
Cheers
Nkt

Edit:I had something, but it will need a small modification. Will look into it asap.

Gustav
 

Latest posts

Back
Top