chunger

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1040 on: December 17, 2017, 06:20:34 PM »
I'm also keen for C12 PCBs when they become available again ;)

Matador has completed the final panel layout and  is getting quotes from the PCB fab now.  We will be ordering these very soon.

DIY photo documentaries consolidated here:  http://studio939.blogspot.com


haima

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1041 on: December 17, 2017, 06:24:46 PM »
Thanks Chunger  - That’s good news :)

 I’ve been holding off on ordering a bunch of things from your site, but as soon as you get the pcbs in stock it’s all on ;)

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1042 on: December 17, 2017, 06:47:11 PM »
Matador has completed the final panel layout and  is getting quotes from the PCB fab now.  We will be ordering these very soon.

Great news for sure! Also been holding of since I will be ordering to Sweden and like to bulk it all into one package  :)

Murdock

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1043 on: December 22, 2017, 09:52:24 AM »
Chunger or anybody who has one. Can you tell me the inside dimension of the wooden box for the HT-11A body?

rockinrob86

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1044 on: December 22, 2017, 04:37:11 PM »
It definitely has some wiggle room, but roughly 9.5" long by 1 3/4" wide and 1 3/4" tall

Murdock

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1045 on: December 22, 2017, 07:59:13 PM »
It definitely has some wiggle room, but roughly 9.5" long by 1 3/4" wide and 1 3/4" tall

Thanks alot! Are these the dimensions of the "cutout" for the mic or the whole inside?

rockinrob86

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1046 on: December 23, 2017, 08:25:32 PM »
It's the cutout

Any new updates on when the pcb will be available again?

chunger

Any new updates on when the pcb will be available again?

Yes,  Matador is working with a new representative at the PCB fab and they are requesting more details than the previous rep was asking for.  So, they are in the process of sorting everything out for the production run.  Every time this happens, it seems Matador has to do a big run-around to satisfy all of the queries.   We are trying to get them printed ASAP.
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Hi Chunger,

Any chance of procuring the M49 shock mount by itself?

Thanks
Mac


Hello Chunger
Are dimensions of the microphone body CU49 on your store same as original Neumann M49 (diameter: 76-80mm)?
I sent you message please check your email.
Thanks

Marko

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1051 on: February 04, 2018, 03:45:22 PM »
Hallo Chunger,
It's possible to use your U67/U87 SwitchPCB as a direct replacement for the old broken Plastic Switches?


chunger

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1052 on: February 04, 2018, 11:53:50 PM »
Hallo Chunger,
It's possible to use your U67/U87 SwitchPCB as a direct replacement for the old broken Plastic Switches?

The parts are not physically cross compatible with original Neumann body.   As far as I know Sennheiser still supplies all replacement parts for repair of vintage units.

DIY photo documentaries consolidated here:  http://studio939.blogspot.com

sr1200

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1053 on: February 08, 2018, 09:46:36 PM »
3D print?  I've done a bunch of parts for mic's and other projects.  If you have a pic or some dimensions id be happy to give it a try for you.
MEI Studio - Long Island, NY: http://www.meirecords.com

analag

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1054 on: February 16, 2018, 06:07:02 PM »
Do you send an email notification with tracking number when you ship or do you even respond to email, sir?
Audio engineering suffers from misinformation, disinformation, and downright lying more than most fields of endeavour.

haima

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1055 on: February 16, 2018, 08:46:39 PM »
I received a tracking number for my package I ordered recently - it was a fairly big order though.

Emails were a bit sporadic, but chunger always got back to me and he was helpful - I’m sure he’s just busy with other things...


chunger

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1056 on: February 18, 2018, 10:29:37 PM »
Do you send an email notification with tracking number when you ship or do you even respond to email, sir?

Hello,

Apologize for the recent delays.  I have a sizeable backlog of orders right now and am working through them in the order received except for special circumstances like upcoming sessions or travel plans where I expedite some outgoing boxes. 

Email notification is sent out when the shipping label is generated and if you require a refund any time prior to shipment, i can process that immediately.
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1057 on: February 19, 2018, 04:42:12 AM »
Hello Chunger
When will be mechanical kit MK47  available again?
I am still waiting for your response on mail about CU49 kits.


chunger

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1058 on: February 19, 2018, 06:54:28 AM »
Hello Chunger
When will be mechanical kit MK47  available again?
I am still waiting for your response on mail about CU49 kits.

MK47 bodies will be back in my next factory shipment.  I will be ordering enough to be in stock for some time.   A few retail microphone builders started using the body kit and that rapidly depleted my stock from this batch, but I am aware of it now and will restock accordingly.

What was your query about the CU49 body kits?
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1059 on: February 19, 2018, 08:48:32 AM »
Just got a message from TC that my capsule is ready for shipping! So excited! Hoping to be able to order pcb and donor body etc soon!

Still going a bit back and forth about wether to go c12 or 251 style. Some people say that the 251 is the best of both worlds being more balanced like a split beween a neumann and a c12. Any thoughts?