Thanks Chunger!


Vetsen

Hey Chunger,

I just received my gen 2 SYT-5 and the mesh is closer together than the pics in this thread. 

Is the first image Gen 1 and the second Gen 2?



Thanks,

Vetsen
"The smoke from the flux is filling my lungs..."

chunger

Hey Chunger,

I just received my gen 2 SYT-5 and the mesh is closer together than the pics in this thread. 

Is the first image Gen 1 and the second Gen 2?



Thanks,

Vetsen



Yes, the first picture is Gen 1 which is a wider mesh than the 2nd gen which is closer to the original.
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Rlucas41

Hi Chunger trying to contact you about ordering u47 fet body

chunger

Hi Chunger trying to contact you about ordering u47 fet body

These are currently in stock http://store.studio939.com/product/gt-2b-microphone-body

Feel free to email me if you have additional questions [email protected]
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Winetree

Chunger,
Are any wooden boxes for the SYT-5 Gen 1 coming over, this time, on the boat?

dougch

Where did the shop go?


burglar

It would be great if the machining on the base could just be a slot so folk could Dymo their own labels in there?  The Behringer B2 has this only i recall the diameter of the slot is smaller than the smallest dymo reel size :(  Could use the plastic or even metal embossed tape as per: http://global.dymo.com/ieIE/LabelsOverview/Embossed_Tapes.html

Searching for a good low-cost 87/67 body option, I have located a good candidate that fits the large rectangular style PCB's.


« Last Edit: January 23, 2015, 01:37:37 PM by burglar »

Chunger,
Are any wooden boxes for the SYT-5 Gen 1 coming over, this time, on the boat?

...while not ideal, the C12 wood box will do in a pinch...


chunger

A few important updates:

- GT-2B microphone have been put back in stock.  I located one more carton of bodies at the bottom of my pile.  This should maintain stock until the new shipment clears customs near the end of the month.

- All orders are SEVERELY delayed right now as I had a series of work deadlines and the household is a bit sick right now.  I will be attempting to gain ground on the shipping queue late this week.

- We are out of stock on C12 PCB sets and will be moving to a new revision board with a few exciting technical improvements.  Details to come as I prototype the new boards.  The power supply will change slightly and new build documentation is already completed to reflect those changes.  http://groupdiy.com/index.php?topic=58054.msg739085#msg739085

- pending orders for old revision C12 boards will be given some options. . . refund, discount and shipment of current revision prototype PCB (100% functional), or hold order until production batch of new revision boards arrive.
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Category 5

A few important updates:

- GT-2B microphone have been put back in stock.  I located one more carton of bodies at the bottom of my pile.  This should maintain stock until the new shipment clears customs near the end of the month.

- All orders are SEVERELY delayed right now as I had a series of work deadlines and the household is a bit sick right now.  I will be attempting to gain ground on the shipping queue late this week.

- We are out of stock on C12 PCB sets and will be moving to a new revision board with a few exciting technical improvements.  Details to come as I prototype the new boards.  The power supply will change slightly and new build documentation is already completed to reflect those changes.  http://groupdiy.com/index.php?topic=58054.msg739085#msg739085

- pending orders for old revision C12 boards will be given some options. . . refund, discount and shipment of current revision prototype PCB (100% functional), or hold order until production batch of new revision boards arrive.

Can you tell us about any of the changes Chunger?  Are you guys floating the high-Z section now?  I think that will improve troubleshooting since a lot or issues are due to the flux contamination and the difficulty of getting the boards totally clean.

Also, any update on the new version of the GT-2B and the MK47 bodies?  MK47 PSU?

Thanks!

MK47 PSU?
Yes, please. Inquiring minds want to know...  ;D
"Kind of like going into Safeway at 4 in the morning and chugging a beer in the produce section; been there, done that." - CJ

"We're not making an atomic bomb, just cooking a few electrons." - PRR

duantro

Ordered a c12,  type 4 from your store.  thanks

HHH

Ordered a c12,  type 4 from your store.  thanks

Same here, plus a type 2 custom basket and parts. Hope he's catching up on processing delays.  It's my first build, so I'm going to try an RK-12 capsule and also an M251 conversion layout. Can't wait to see how it compares to a vintage C12.

chunger

UPDATE:  I have received a re-supply shipment from China and unloaded it today.  I apologize for the delays on this shipment.  Port strikes up and down the US West Coast and x-ray examination of the container with my cargo severely delayed freight delivery times.

The following items will be updated to the webstore shortly.

- Alctron MK47 (U47 clone) microphone bodies
- U47 shock mounts (back in stock)
- upgrade HT-11A shock mounts available separately
- GT-2B M27 threaded shock mounts available separately
- GT-2B microphones (back in stock)

I have a lot of development work to do for verifying the next generation C12 PCB sets and am still currently working with a long packing backlog, so I apologize for the delays.
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Ordered an MK47 body from your store!

Thank you for making these available!

shabtek

are the mk47 body tubes brass--not aluminum
"really fine players do not use stomp boxes or master volume, they match the amp to the room and turn it up to 11.  Stevie Ray, BB King, Albert King, Duane Allman, Dicky Betts, Louis Armstrong"
   -CJ

chunger

are the mk47 body tubes brass--not aluminum

The MK47 tubes are nickel plated brass.
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

HHH

UPDATE: ...
The following items will be updated to the webstore shortly.
- upgrade HT-11A shock mounts available separately...

I have a lot of development work to do for verifying the next generation C12 PCB sets and am still currently working with a long packing backlog, so I apologize for the delays.

Will HT-11A Body Kits ship with the upgraded shock mounts?
Any chance that orders in place as of the 13th will ship by the end of this week? :)