burglar

Really sorry but can you please cancel my order placed today for x2 cinemag 13113 heading for Yeovil UK.  Thank you :)


Matador

Thanks for the detailed response!

If you decide to go down this route, please PM me as I have some calcs done for the proper resistors to use for a U47 supply.

chunger

Really sorry but can you please cancel my order placed today for x2 cinemag 13113 heading for Yeovil UK.  Thank you :)

Done!
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Hey Chunger,

Are there any Matador C12 PCB kits available right now?

Thanks

Recording Engineer

Are any wood boxes or zippered-pouches available for 47-sized mics yet?

If not, anyone have a suggestion?

Avgatzeblouz

On my end, I would like to know when boxes for SYT-5 will be available again.

Thanks, Chunger !

chunger

All wood box types are back in stock now!

SYT-5/ U47
GT-2B
HT-11A

M49 bodies have been received and look good except some screws are missing so I will have to source those before I can take photos and list them.

DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Neutrino

Hey chunger,
any idea when the Matador C12 PCBs will be back in stock again?

Jim50hertz

Hey chunger,
any idea when the Matador C12 PCBs will be back in stock again?
This ;D
"Nasty, talking to a slightly deaf journalist, had claimed only that the Rutles were bigger than Rod."

lkipod

This ;D

+1
Also are the full kits going to be available again? :)


Hank Dussen

I'd be in for a PCB as well.  :D

chunger

I apologize for the extended delays restocking the C12 PCB sets.  There is an ELA M251 prototype on my bench  that I am almost finished confirming.   I will order C12 and ELA M251 PCB's together in bulk once the prototype is confirmed.  After this, PCB's should be in stock.  Please standby.

I have added a few very small items that have been repeatedly requested.

3 pin and 7 pin XLR inserts that fit most imported microphone bodies


Soft tube socket mounts for HT-11A microphone body


A new single screw capsule mount with slotted saddle mount holes that should fit most 34mm capsules without drilling the saddle





And, the big one, M49 bodies are now in stock and live on the webstore.    I apologize for the super expensive Binder 961 series connectors.  . . these are often requested as an option.  I may attempt to have an XLR insert base piece made to have a lower cost option in the future.

« Last Edit: October 26, 2017, 01:37:10 AM by chunger »
DIY photo documentaries consolidated here:  http://studio939.blogspot.com

Neutrino

I apologize for the extended delays restocking the C12 PCB sets.  There is an ELA M251 prototype on my bench  that I am almost finished confirming.   I will order C12 and ELA M251 PCB's together in bulk once the prototype is confirmed.  After this, PCB's should be in stock.  Please standby.

That's great news. Will the 251 PCB be compatible with the BeesNeez 251 bodies?

grubbyliver

These look good for a 251 style body...

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1034 on: November 02, 2017, 08:01:23 AM »
Hello
i would like to know if the T BONE sct700 bocy will have the good sizes for a pleuso BV8P,  and a vf 14 ? also, do you have vf 14 sockets ?
thanks you for your answer and such a good work !
I also would like to know : would the eagletone cm902 be a good donor for a u47 with the components I mentioned ?
thanks again
luc from France.
« Last Edit: November 02, 2017, 08:06:25 AM by cielapeute »

ilikeit

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1035 on: November 03, 2017, 06:53:34 AM »
Paypal send!!! :P

rockinrob86

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1036 on: November 09, 2017, 10:23:27 AM »
Hey Chunger,

I ordered some things on Oct 24th and emailed a week ago but haven't heard anything, has this shipped?  Did you see the order?

Thanks!

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1037 on: December 08, 2017, 03:57:30 PM »
Also very interested in a complete C12 kit when it becomes available again! :) Any idea when they will be available again?
« Last Edit: December 11, 2017, 11:12:47 AM by ribor92 »

Joeleo

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1038 on: December 16, 2017, 10:00:36 PM »
Please count me in for a C12 kit when they're available again.

haima

Re: Unmarked Microphone bodies and parts (SYT-5, CU-49, HT-11A, GT-2B, and U47)
« Reply #1039 on: December 17, 2017, 06:45:23 AM »
I'm also keen for C12 PCBs when they become available again ;)