US Source for 4mm->6.3mm (1/4") shaft adapters?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

benlindell

Well-known member
Joined
Feb 28, 2009
Messages
631
Location
NYC
Mouser has 1/8" to 1/4" adapters but I have a 4mm pot that is just a touch too big for them, I tried drilling them out but that was a bit of a mess. I know about the adapter at Banzai but I was hoping someone knows of a US supplier for them.

Thanks,

Ben
 
I have some 1/4" long x 4mm inside x 1/4" outside plastic thingies I use for this, you can drill a hole through it for the set screw.
You are welcome to some, I have plenty!
 
Back
Top