How to bypass the Sansamp PSA-1 speaker simulation ?

sezare56 · Nov 4, 2012

Hi.

It is possible with the Sansamp Character Series so I wonder if it's possible with the PSA-1, wich I red, but I can't find how...
Any ideas ?

Axe_Meister do it apparently but I can't register this forum for the moment :
http://forum.musicradar.com/showthread.php?118303-Speaker-Tuning

Thanks.

pucho812 · Nov 4, 2012

tech 21 product specialists says you cannot bypass the speaker simulator on the PSA-1

sezare56 · Nov 4, 2012

They said this for other products and it was possible...

12afael · Nov 4, 2012

usually they products have epoxy glue over some parts.

you have to find the input of the hi pass filter and the output of the low pass usually they use 2 low pass IIRC.

a schematic would be useful. it should be close to the gt2 I think. maybe a different eq and controll of course.

sezare56 · Nov 5, 2012

Thanks but I don't know how to recognize the filters. Here are the picture of the PCB :

http://www.groupdiy.com/index.php?topic=40781.0

How to bypass the Sansamp PSA-1 speaker simulation ?

Help Support GroupDIY Audio Forum:

sezare56

New member

pucho812

Well-known member

sezare56

New member

12afael

Well-known member

sezare56

New member

Similar threads

Latest posts

How to bypass the Sansamp PSA-1 speaker simulation ?

Help Support GroupDIY Audio Forum:

sezare56

New member

pucho812

Well-known member

sezare56

New member

12afael

Well-known member

sezare56

New member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!