Sound Skulptor MP573 Racking (help needed please)

Hello,
SO I've just finished a SS MP573 and a Five Fish PSU 2442mk2 for a client. I planning on racking this module alone in a standard 19" 1U rack chassis.
I was wondering about wiring the module to the XLR in and XLR out.
Should I wire the module like this?

1. Star ground
2. XLR Out pin 2
3. N.C. (no connection)
4. XLR Out pin 3
5. N.C.
6. N.C.
7. N.C.
8. XLR In pin 3
9. N.C.
10. XLR In pin 2
11. N.C.
12. +16V
13. PSU ground
14. -16V
15. +48V

Please let me know if I'm doing this correctly, and thanks,
Dave

Not sure what you mean ? if it's the [5]73  should follow that standard [ api 500 style racks ] and keeping it that way
would allow use in 500 racks in the future , no ?

I'm putting it in a single space 19" rack not in a VPR rack. I don't have a card connector so i was just going to hardwire the wires from the xlrs and psu to the PCB fingers of the module.
I just want to know that I'm wiring it correctly.

Dave

Follow this for wiring.

Or follow the schematics...they have the pinning down on there.

All the 500 rack should follow a standard no matter whether you're using it in one or not ,
so as 3nty says double their schematic against the one he posted , if the pcb is already
manufactured , you can't change that , get the pwr to the pwr & the i/o to the i/o
shouldn't be a problem