What project do you want for Christmass, guys?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A pcb for making a desk style fader - with balanced input, pan/mute/solo, fader amp, balanced bus outs for L/R and a unbalanced solo bus out + control line.

And to with it,  a metal face panel with legending and cutouts for PG fader and for illuminated square switches for mute and solo.

:)

The idea being to easily make a high quality analoog fader panel. To go with all the nice DIY and summing amps.
 
sta-level build or a AM64 build or similar.

Also a simple modular desk channel like what Alex is talking about above.  Not the mic pre or eq but a simple routing module that could feed 2 auxes, with pan and fader capabilities.  This to allow building a modular console using all the summing projects kicking about.  maybe include HPF and LPF but simple rather than heavily optioned.
 
Well, if you're talkin about something we've never seen DIY before...  Ill +1 the MassivePassive type EQ, or something like an SPL transient designer, maybe even a DIY Reverb (not a plate... already workin on that) or delay .
 
thought of one more lol (sorry for the flood here). 

I could really use a unit that allows for a vol. adjustable stereo input and has a vol adjustable talkback mic that dims the input when a momentary button is pushed to a stereo OUT, and THATs it. no monitor selection, switching, summing, coffee machine, fax, etc.  Simple enough to build, just too lazy to do so.
 
I´m into 500 series now so:

A phase tool would be great, something like Radial PhazeQ

http://www.radialeng.com/r2011/phazeq.php

The EXTC is cool too.

http://www.radialeng.com/r2011/extc.php

The SPL transient plugin works great, I don´t feel the need for the hardware at the studio

Thx Santa

 
sr1200 said:
Well, if you're talkin about something we've never seen DIY before...  Ill +1 the MassivePassive type EQ, or something like an SPL transient designer, maybe even a DIY Reverb (not a plate... already workin on that) or delay .
+1 on the massivo type EQ!
 
I could use a good summing box. Something that rivals the dangerous stuff would be cool :).


Haha, oops! Just noticed this right after... http://www.groupdiy.com/index.php?topic=50710.msg0#new
 
while i allready voted for a envy Looper / tran***t desi***er,
a phase alignement tool ala Little Labs could be very nice !!
thanks for your time Igor !
 
Come on guys where is your imagination? Who want's yet another clone of something that has been done before when you have an opportunity to define something unique.  (apparently several of you).

Oh well...

JR
 
Back
Top