meltingpat
Member
- Joined
- Dec 28, 2012
- Messages
- 7
in the MNATS wiring guide it states this (below)
NOTE: If you are using an original or Hairball 5002 reproduction, you must also tie the yellow and orange output wires together to connect the secondary windings in series.
Are they tied together(to each other)? or tied to the red and blue (going to XLR Output) also?
NOTE: If you are using an original or Hairball 5002 reproduction, you must also tie the yellow and orange output wires together to connect the secondary windings in series.
Are they tied together(to each other)? or tied to the red and blue (going to XLR Output) also?
