Moses
Well-known member
Hi all,
I seem to be having a problem with the Right output of my box. The problem seems to be that it clips early, and hard.
it seems to be an output stage problem, as I can drive the right channel into clipping using the output level trimmer. If the front panel gain control reaches above the 0dB mark (12 o'clock position) the right channel has distortion, which i cannot replicate on the left channel.
I have swapped the output amp (5532) over with another, and the problem remains.
Any suggestions, or a schematic floating about?
Thanks!
Mo
I seem to be having a problem with the Right output of my box. The problem seems to be that it clips early, and hard.
it seems to be an output stage problem, as I can drive the right channel into clipping using the output level trimmer. If the front panel gain control reaches above the 0dB mark (12 o'clock position) the right channel has distortion, which i cannot replicate on the left channel.
I have swapped the output amp (5532) over with another, and the problem remains.
Any suggestions, or a schematic floating about?
Thanks!
Mo