**** PLEASE NOTE : IF YOU ARE USING CHROME AS YOUR BROWSER THE PRODUCT IMAGES WILL NOT BE VISIBLE ON YOU PC AS IT SEEMS CHROME IS BLOCKING THEM. PLEASE PM or E-MAIL ME IF YOU HAVE A QUERY ***********
Total Audio Control 500 SERIES RACKS500 series racks with comprehensive signal splitting and routing facilities. Now available in 11, 6, 3 and 1 slot versions.
All versions are GDIY 51X, API and Radial compatible.
For detailed information please see;
http://groupdiy.com/index.php?topic=57588.msg733908#msg733908https://groupdiy.com/index.php?topic=64358.0***********************************************************************************
11 SLOT BASIC 
(Please note that the SubD25 connectors are optional.)
Kit includes;
Metalwork
Backplane PCB
Status LED PCB + LEDs + Ribbon Cable Assembly
Card Edge Connectors
Neutrik Male XLRs
Neutrik Female XLRs
Hardware
22 x 4-40 Module Mounting Screws
5 PIN XLR DC Power Connector Set (Chassis Plug and Cable Socket)
VPR compatible ( + -16V and + 48V operation) GBP 210.00
GDIY 51X version (+ -16V, +-24V and +48V operation) GBP 220.00
11 SLOT ADVANCE 
Slots are upgraded individually to meet your specific requirements.
I/O UPGRADEKit includes;
3 x TRS jack socket
3 x DPDT toggle switch
1 x SPDT toggle switch
1 x Dual row 2X7 pin header
1 x Dual row 5 x 7 pin header
10 x Jumper
GBP 13.00 PER SLOT.
SUB D25 CONNECTOR ASSEMBLY Complete with fitted ribbon and PCB transition header.
GBP 10.00 For 2 connectors as a set.
BALANCING CARD KIT
Including all the components.
GBP 28.00.
************************************************************************************
6 SLOT BASIC 
Kit includes;
Metalwork
Backplane PCB
Status LED PCB + LEDs + Ribbon Cable Assembly
Card Edge Connectors
Neutrik Male XLRs
Neutrik Female XLRs
Hardware
14 x 4-40 Module Mounting Screws
7 pin power connector set (chassis plug + cable socket)
Blanking plugs
Price GBP 130.00
ADVANCE UPGRADE SLOT I/O UPGRADEKit includes;
3 x TRS jack socket
3 x DPDT toggle switch
1 x SPDT toggle switch
1 x Dual row 2X7 pin header
1 x Dual row 5 x 7 pin header
10 x Jumper
GBP 13.00 PER SLOT.
SUB D25 CONNECTOR ASSEMBLY Complete with fitted ribbon and PCB transition header.
GBP 10.00 For 2 connectors as a set.
BALANCING CARD KITIncluding all the components.
GBP 28.00.
************************************************************************************
RACK MOUNTING BRACKETS FOR 6 SLOT
GBP 30.00
*************************************************************************************
3 SLOT BASIC
Kit includes;
Metalwork
Backplane PCB
Status LED PCB + LEDs + Ribbon Cable Assembly
Card Edge Connectors
Neutrik Male XLRs
Neutrik Female XLRs
Hardware
8 x 4-40 Module Mounting Screws
7 Pin Power Connector Set ( chassis plug + cable socket)
Blanking plugs
Price GBP 115.00
ADVANCE UPGRADE 
I/O UPGRADEKit includes;
3 x TRS jack socket
3 x DPDT toggle switch
1 x SPDT toggle switch
1 x Dual row 2X7 pin header
1 x Dual row 5 x 7 pin header
10 x Jumper
GBP 13.00 PER SLOT.
BALANCING CARD KITIncluding all the components.
GBP 28.00.
*************************************************************************************
1 SLOTBASIC 
Kit includes;
Metalwork
Backplane PCB
Status LED PCB + LEDs + Ribbon Cable Assembly
Card Edge Connectors
Neutrik Male XLRs
Neutrik Female XLRs
Hardware
4 x 4-40 Module Mounting Screws
7 Pin Power Connector Set (chassis plug + cable socket)
Blanking plugs
Price GBP 90.00
ADVANCE UPGRADE 
I/O UPGRADEKit includes;
3 x TRS jack socket
2 x DPDT toggle switch
1 x Dual row 2X7 pin header
1 x Dual row 5 x 7 pin header
10 x Jumper
GBP 10.00 PER SLOT.
BALANCING CARD KITIncluding all the components.
GBP 28.00.
*************************************************************************************
FLOOR BOX (FB) POWER SUPPLY KITS Floor Box Power Supply comes in a standard aluminium case as shown in the below pictures. Two outputs are provided as A and B respectively. Both outputs are separately fused. AC mains connection is established through the IEC with Fuse and On/Off switch. The mains voltage selector switch is provided for 115VAC and 230VAC operation. DC outputs are remotely controlled on/off through a toggle switch fitted on the rack.
******************************************************************************************
FB 1 (for VPR)One cable output for 1 x 11 slot with + - 16V operation :DC OUTPUT A: + - 16V @ 2.75A / + 48V @ 160mA
DC OUTPUT B: Not used ( blanking plugs are provided for unused holes)
GBP 175.00
Two cable output for 2 x 11 slot with + - 16V operation :DC OUTPUT A: + - 16V @ 1.7A / + 48V @ 160mA
DC OUTPUT B: + - 16V @1.7A / + 48V @ 160mA
GBP 240.00
********************************************************************************************
FB 2 (for GDIY 51X )One cable output / 1 x 11 slot rack with + - 16V and + - 24V operation:DC OUTPUT A: + - 16V @ 1.7A / + - 24V @ 1.7A / + 48V @ 300mA
DC OUTPUT B: Not used ( blanking plug is provided for unused hole)
GBP 225.00
Two cable output / 2 x 11 slot rack with + - 16V and + - 24V operation:DC OUTPUT A: + - 16V @ 0.85A / + - 24V @ 0.85A / + 48V @ 160mA
DC OUTPUT B: + - 16V @ 0.85A / + - 24V @ 0.85A / + 48V @ 160mA
OR
DC OUTPUT A: + - 16V @ 1.7A / + 48V @ 160mA
DC OUTPUT B: + - 24V @ 1.7A / + 48V @ 160mA
GBP 240.00
*******************************************************************************************
1U RACK MOUNT POWER SUPPLY KIT Can power two 11 slot racks (22 modules).
AC INPUT: 115/230V
DC OUTPUT 1: + - 16V @ 2.5A or + - 24V @ 1.7A
DC OUTPUT 2: + - 16V @ 2.5A or + - 24V @ 1.7A
DC OUTPUT 3: + 48V @ 170mA
GBP 430.00
+++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++
MICPRE ONE
MICPRE ONE is similar in topology to the transformerless design Graham used on the Amek M2500 mixing console and the original Angela console of 1982.....
Further information with assembly manual and bill of materials can be downloaded from;
http://www.totalaudiocontrol.com/pr/show/2Download assembly manual from the below link;
http://www.totalaudiocontrol.com/docs/MICPRE-ONE-MANUAL-3766.pdfLink to GroupDIY thread;
http://www.groupdiy.com/index.php?topic=52443.0The kit comes complete with
all the components and a comprehensive assembly manual with detailed photographic illustration of each assembly sequence. However, as well as having a support thread here, unlimited e-mail support is also available.
Available in Black and Chrome versions.
The price is GBP 235.00
++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++
MICPRE TWO
MICPRE TWO follows the topology of the transformerless microphone preamplifier employed on the Amek Rembrandt console, with the use of dual ganged potentiometer arrangement to provide greater linearity of the gain control, compared with the use of a single ganged potentiometer.
Further information with assembly manual and bill of materials can be downloaded from;
http://www.totalaudiocontrol.com/pr/show/5Available in Black and Classic look versions.
The price is GBP 185.00
+++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++
COMPRESSOR ONE ONE 
COMPRESSOR ONE is an outstanding VCA compressor with multi-channel operation capability and user configurable sidechain filters.
Further information with assembly manual and bill of materials can be downloaded from;
http://www.totalaudiocontrol.com/pr/show/18The kit comes complete with
all the components and a comprehensive assembly manual with detailed photographic illustration of each assembly sequence. However, as well as having a support thread here, unlimited e-mail support is also available.
The price is GBP 275.00
+++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++
EQ ONE 
EQ ONE follows the topology of the four band parametric equaliser that Graham first used in the Amek M3000 mixing console in 1979. This was later adapted for use in M1000 and M2500 consoles and formed the basis of the equaliser design in many other Amek and Total Audio Concepts consoles....
Further information with assembly manual and bill of materials can be downloaded from
http://www.totalaudiocontrol.com/pr/show/5Download assembly manual from the below link;
http://www.robotica.co.uk/tac/EQ_ONE_MANUAL.pdfLink to GroupDIY thread;
http://www.groupdiy.com/index.php?topic=52444.0Download assembly manual from the below link;
http://www.robotica.co.uk/tac/EQ_ONE_MANUAL.pdfThe kit comes complete with
all the components and a comprehensive assembly manual with detailed photographic illustration of each assembly sequence. However, as well as having a support thread here, unlimited e-mail support is also available.
The price is GBP 285.00
+++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++
MID-SIDE ONE
Further information with photographs on the below link;
http://groupdiy.com/index.php?topic=62527.0MID-SIDE ONE is a very versatile M/S encoder and decoder with inserts.
Further information with assembly manual and bill of materials can be downloaded from;
http://www.totalaudiocontrol.com/pr/show/15Download assembly manual from the below link;
http://www.robotica.co.uk/tac/MID_SIDE_ONE_MANUAL.pdfThe kit comes complete with
all the components and a comprehensive assembly manual with detailed photographic illustration of each assembly sequence. However, as well as having a support thread here, unlimited e-mail support is also available.
Price GBP 285.00
+++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++
INSERT ONE KitINSERT ONE is a single width module specifically designed for providing insert points for MID-SIDE ONE when it is used on 500 series racks that do not have insert points.
INSERT ONE comes in two versions.
MID-SIDE ONE version includes the BALANCING CARD. GBP 120.00
STAND-ALONE version does not include the BALANCING CARD. GBP 95.00
For detailed info
https://groupdiy.com/index.php?topic=65067.msg824491#msg824491
+++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++
MODULE EXTENDER KitComplete with the ribbon cable (supplied pre-assembled), PCBs, card edge connector and test points as shown in the below image.
GBP 20.00
++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++
CMRR/SYMMETRY TRIMMING JIG. Half KitHalf kit includes the PCBs, ribbon cables (supplied pre-assembled), card edge connector, box headers and jack connectors, as shown in the below image.
GBP 40.00
User and assembly manual with good amount of info on CMRR and SYMMETRY. Jig schematic is also included.
http://www.robotica.co.uk/tac/CMRR_TRIMMING_JIG_MANUAL_V2.pdf
++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++
CMRR/SYMMETRY TRIMMING JIG. Full KitFull kit includes the CMRR/SYMMETRY CARD, MODULE EXTENDER and all the components as shown in the below image.
(Ribbon cables are supplied pre-assembled.)
GBP 65.00
User and assembly manual with good amount of info on CMRR and SYMMETRY. Jig schematic is also included.
http://www.robotica.co.uk/tac/CMRR_TRIMMING_JIG_MANUAL_V3.pdf
++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++
6 CHANNEL ROUTING MODULE
Allows front panel access to the inputs of 6 modules and outputs of another 6 modules through the selector switches. By patching the input and output XLRs it also provides routing the outputs of any of the 6 modules to the inputs of any other 6.
The kit comes with all the components including the ribbon cables terminated on one end by 26 way PCB transition header.
GBP 50.00
++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++
PURCHASING UK and EC customers:20% VAT will be applied.
However if you have a valid VAT number then the VAT will not be charged.
Rest of the World customers:No VAT is applied
Prices are exclusive of shipping and paypal fees.
However in larger orders bank charges often work out greatly cheaper than the paypal fee. Therefore I will be stating both options in your payment schedule.
Contact: By e-mail to
[email protected]+++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++