fluxofpinkindians
Active member
- Joined
- Jan 15, 2013
- Messages
- 26
I just built the Drip Pultec V2.
Checking in Spectrafoo I noticed that the curves for 20, 60 and 100 hz behave as expected but for some reason the 30hz curve is almost identical to the 100hz curve (differs after 1.5khz). Pic attached.
Could this be a faulty capacitor or a short at the low freq selection switch ?
Would really appreciate any help or suggestions.
with thanks
Checking in Spectrafoo I noticed that the curves for 20, 60 and 100 hz behave as expected but for some reason the 30hz curve is almost identical to the 100hz curve (differs after 1.5khz). Pic attached.
Could this be a faulty capacitor or a short at the low freq selection switch ?
Would really appreciate any help or suggestions.
with thanks
