Quite normal, considering smoking pot is the most reported activity in the studio...rkn80 said:A cigarette lighter will be the next project. 8)
rkn80 said:1) Yes it is a mic amp based on PGA2500 coupled to an ADC.
culteousness1 said:Would you please be so kind to share your analogue section?
Mine is straight according TI's Datasheet. Interested in seeing your's.
rkn80 said:Well then I have two good news for you:
1) Yes it is a mic amp based on PGA2500 coupled to an ADC.
2) The ADAT-interface is already done. I'm still designing the mainboard, that works together with the ADAT interface. I hope I can show you the mainboard this summer.
Because the mainboard should also carry the microphone module I did this first to make sure.
R.
Enter your email address to join: