Che_Guitarra
Well-known member
I've just finished building a pair of Bluzzi 1084 EQs, and now ready to power them up with the aid of a Five Fish 2448mk2 PSU. Whilst I understand the hookup of the AC side of the PSU, i'm not 100% confident with the DC pinout and hookup to my 1084s.
The EQ's require a power input with a +24VDC and a zero volt pin. The 2448's have four groups (DC1, DC2, DC3, DC4), each group has a +48V, V+, V- and ground. I'm guessing to use DC1 and DC2 - one for each of the 1084's, with only the V+ and ground pins running to the unit?
If my logic is wrong I hope someone can point me in the right direction on how to hookup this PSU - info seems a bit thin on the ground.
The EQ's require a power input with a +24VDC and a zero volt pin. The 2448's have four groups (DC1, DC2, DC3, DC4), each group has a +48V, V+, V- and ground. I'm guessing to use DC1 and DC2 - one for each of the 1084's, with only the V+ and ground pins running to the unit?
If my logic is wrong I hope someone can point me in the right direction on how to hookup this PSU - info seems a bit thin on the ground.