I am measuring 32 mhz clock signal of a oberheim keyboard using my dual trace oscilloscope. The crystal says 32mhz on it. using a 100 mhz scope set to ac input .
I am used to measuring sine waves and square waves through - input to output- amplifiers as a probe but this is new grounds for me. Usually have the chan. set to about 1 volt per division and 0.1 ms when doing so
Any tips on what i am missing - or maybe the clock is dead and therefore why this keyboard wil not produce audio.
thanks in advance
I am used to measuring sine waves and square waves through - input to output- amplifiers as a probe but this is new grounds for me. Usually have the chan. set to about 1 volt per division and 0.1 ms when doing so
Any tips on what i am missing - or maybe the clock is dead and therefore why this keyboard wil not produce audio.
thanks in advance