Steve Jones

Thanks to Niko, who kindly posted me photocopies of these diagrams, here are the circuits for the ADR Gemini compressor.

http://homepage.mac.com/agenttriez/

I got one recently, as I use an ADR Vocal Stresser all the time, and I hope that this will have a similar character, but stereo. It is an all discrete FET design, the only chips in the unit are the meter drivers. I haven't heard it properly yet as it needs some service, currently the left and right channels are uneven, but a re-cap, re-trimpot and some new pots and a calibration should see to that. Oddly enough for ADR it is unbalanced, but if it sounds good I will soon fix that!

I haven't posted the PCB layout, it looks a little busy to reproduce well, lots of stuff overlayed onto it, but the PCB is silkscreened, so anyone servicing one shouldn't have a problem. The schematic shows 1 of 2 channels, each channel has identical component numbers/designations.
Synthesizer technician
Sydney Australia.

http://synthrepairs.com


Mark Burnley

Here are schematics for ADR Gemini Easy Rider compressor.
« Reply #1 on: June 18, 2004, 05:54:51 AM »
Wow,

Thanks Steve! I love the ADR gear, and thanks too for the Compex documents- my copy is a little dog-eared to say the least!

Great stuff.

Mark
O_O tape is life O_O

Steve Jones

Here are schematics for ADR Gemini Easy Rider compressor.
« Reply #2 on: June 18, 2004, 05:54:59 AM »
If anyone needs the EQ section of the F769X-R I have it also, but it is printed on some wierd old blueprint paper that I think will not reproduce very well. I have to strain to read it as is.
Synthesizer technician
Sydney Australia.

http://synthrepairs.com

Steffen

Here are schematics for ADR Gemini Easy Rider compressor.
« Reply #3 on: June 18, 2004, 09:38:24 AM »
Thanx Steve!

steff

Peter Simonsen

Here are schematics for ADR Gemini Easy Rider compressor.
« Reply #4 on: June 18, 2004, 09:43:00 AM »
Thanks Steve,

I did send out this information to everybody who wanted it last year Mr. gyraf Jakob should have this stocked somewhere as well as I send him the scans..never made it  to his HP though..;-) lazy bastard.. :grin:

Thanks again Steve..I have a couple of these comps that I use, and like a lot...

Kind regards

Peter

henk

Here are schematics for ADR Gemini Easy Rider compressor.
« Reply #5 on: December 23, 2004, 06:04:26 PM »
Hey steve

have try to load it , but it seems that the link is gone
can somebody send me a copy of it aswell at
htgerbenzon(at)hotmail(dot)com

Here are schematics for ADR Gemini Easy Rider compressor.
« Reply #6 on: December 23, 2004, 06:22:37 PM »
The link is dead.I can't seem to get it either.


 

Related Topics

  Subject / Started by Replies Last post
1 Replies
2717 Views
Last post June 08, 2004, 09:52:37 AM
by Steve Jones
8 Replies
5035 Views
Last post March 08, 2011, 05:14:28 AM
by Farringdon
0 Replies
1688 Views
Last post November 07, 2011, 03:24:50 PM
by go5011
5 Replies
289 Views
Last post October 17, 2020, 01:02:33 PM
by skeptic12