Test Point
Well-known member
Hey all...I need assistance..........I could be a hero if I can come up with something to locate a partial short on some mixers we have at my job....They are B*******ringer mixers and several of them have a 300 ohm or so short to ground on the +15 volt rail. it could be any one of hundreds of components that is partially shorted and trying to localize the problem by cutting traces is an almost impossibility...I thought I remembered something on this board about someone building a short tracer (and if so would this trace/locate a partial short). Before I came to this place to work last year, they had scrapped about a dozen of these mixers because of this same problem so it looks like something that is endemic to this series of mixers.....I know, I know...the best B****ringer mixer is a scrapped mixer but it would make the techs some money if we had a way of actually being able to cost effectively trace the problem and get these back on the shelves so some sucker...er I mean, some customer, can put it to use.....any ideas would be greatly appreciated....
Thanks all
TP
Thanks all
TP