hairball 1176 vev D Meter problem

solderfumes · Nov 6, 2013

I have finished building my 1176 rev D and calibrated it as instructed. Does anyone have an idea why the meter slams and sticks when I push the 4:1 ratio button? The meter moves to the left when I select the other ratios.

hymentoptera · Nov 10, 2013

This really should be in the Rev D thread, it would get more attention there, but my first guess is a wrong resistor or solder bridge on the ratio board. Look the ratio board over GOOD for anything out of place, such as the wrong resistor, glob of solder, etc.

Is the meter slamming in GR mode or output +4/+8 modes? Assuming you mean GR mode..

solderfumes · Dec 16, 2013

I will follow your advise. It only slams in GR mode. Thank you much

hairball 1176 vev D Meter problem

Help Support GroupDIY Audio Forum:

solderfumes

New member

hymentoptera

Well-known member

solderfumes

New member

Similar threads

Latest posts

hairball 1176 vev D Meter problem

Help Support GroupDIY Audio Forum:

solderfumes

New member

hymentoptera

Well-known member

solderfumes

New member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!