miscend

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #60 on: September 04, 2015, 12:52:39 PM »
Will you be restocking the Mixbuzz 500 and F76 PCBs in the future?


rob_gould

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #61 on: September 05, 2015, 09:40:09 AM »
Hi Rob
You order was posted; it should certainly be with you by now. Let me know if you dont get it in the next day or so

Coolio, thanks for the update. Nothing's arrived yet but I'll give it another week.

ramshackles

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #62 on: September 17, 2015, 02:01:33 AM »
A couple of the  " in the works " kits sound good
what is the status of the ISA  pre & the easy 69 eq ?
easy69; I have built 2 prototypes of this eq on euroboard. A couple more adjustments and then it is ready.

ISA: In the planning stages. It is similar to the console version of the ISA110, with input and output transformers. It only has the high and low pass filters (not the full channel strip) and I'll be using the LL1538 transformer (as used in the more modern 'ISA' range) for input rather than the 'VT24469' of the original (as I dont know what that is!)

kustohm

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #63 on: September 17, 2015, 06:06:15 AM »
Hi,

Will you market again your "rackit"?
Mixbuss too?
"Absurdity is the only Reality"

dribro

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #64 on: April 04, 2016, 04:39:00 PM »
Hi James.  It's been a while so I'll give this thread a little bump as I'm sure there is a few people interested. Do you plan to make another run for the mixbuzz 500?

peskado

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #65 on: July 04, 2016, 11:40:42 AM »
Hello!
any chance for buy 2 x he69?

ramshackles

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #66 on: September 22, 2016, 01:32:04 AM »
Hello!
It has, unfortunately being a long time since I have been active on the forum; my real life as a developer and a new little girl took up a lot of time. Well, now I have had some time off from the daily grind to be able to reflect upon what is important (namely, everything but the day job!) And I will be dedicating more time to the shop and electronics in general from now on. We are still open for businesses and my first port of action is to evaluate stock and old projects...

Upacesky

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #67 on: September 22, 2016, 03:39:51 AM »
Great to hear from you!
Keep us tuned about your next move. I'd be glad to order some boards.

jasonallenh

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #68 on: September 25, 2016, 02:58:50 PM »
Hello!
It has, unfortunately being a long time since I have been active on the forum; my real life as a developer and a new little girl took up a lot of time. Well, now I have had some time off from the daily grind to be able to reflect upon what is important (namely, everything but the day job!) And I will be dedicating more time to the shop and electronics in general from now on. We are still open for businesses and my first port of action is to evaluate stock and old projects...

The 4KCCs pcbs I got from you grew up to become a great pair of compressors for me. Glad to see you're back!
Successful builds:
G-Calrec
G-Pultec
GSSL
Igor's 4kCC
Poctop's u87
Matador/Chunger C12 (almost)

peskado

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #69 on: September 25, 2016, 05:19:01 PM »
Hello!
It has, unfortunately being a long time since I have been active on the forum; my real life as a developer and a new little girl took up a lot of time. Well, now I have had some time off from the daily grind to be able to reflect upon what is important (namely, everything but the day job!) And I will be dedicating more time to the shop and electronics in general from now on. We are still open for businesses and my first port of action is to evaluate stock and old projects...

Hello!
Glad hear it!
Hope HE69 will back)


ramshackles

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #70 on: February 01, 2017, 03:53:24 AM »
MixBuzz is available, 4KCC on the way.

iprovlek

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #71 on: February 01, 2017, 01:05:33 PM »
MixBuzz in 500 series?

ramshackles

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #72 on: February 02, 2017, 03:45:22 PM »
MixBuzz in 500 series?

Yah. We roll it no other way.

dribro

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #73 on: February 03, 2017, 08:43:39 AM »
very good news on the mixbuzz! ordered!

regards!

peskado

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #74 on: February 03, 2017, 02:07:37 PM »
Hello
What about he69?  :)

dribro

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #75 on: February 17, 2017, 08:31:43 AM »
got the awesome mixbuzz boards, James.

thanks

ramshackles

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #76 on: February 17, 2017, 10:07:48 AM »
Good stuff.
4KCC is back in stock also.
We have 1 He69 left for now...

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #77 on: February 17, 2017, 12:53:33 PM »
Good stuff.
4KCC is back in stock also.
We have 1 He69 left for now...

I willl take it
but any chance for second board?)

ramshackles

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #78 on: April 04, 2017, 06:10:26 AM »
Phew...that was a frenzied March.
MixBuzz is sold out. Still plenty of 4KCC and one lonely F76.
 I will be restocking.

ramshackles

Re: Ramshackle Recording's DIY Shop - Igor's projects and more
« Reply #79 on: April 25, 2017, 05:17:58 AM »
All boards back in stock.
I have launched a new website, which has a new lower shipping rate for most places and lower prices for most of the boards  :D.

It is a bit spartan for now - you can literally look at and buy the boards and that's it. I'll be expanding it in the coming weeks.

Any problems using the site, just give me a holler at [email protected]