ramshackles

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #100 on: August 22, 2018, 01:28:06 AM »
hello @majestic - I guess you have got your order now?


Majestic12

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #101 on: August 22, 2018, 01:02:18 PM »
hello @majestic - I guess you have got your order now?
Yes, it has arrived !

Thanks alot !

ramshackles

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #102 on: August 24, 2018, 01:36:05 AM »
Great!

To all those asking for a Mixbuzz 500 kit - YES. I am working on getting this together.

Right now, we have plenty of 4KCC parts kits in stock ready to go!

indraperkasa

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #103 on: August 24, 2018, 05:58:28 AM »
yaaay can't wait for the mixbuzz!  ;D

ramshackles

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #104 on: October 03, 2018, 05:14:45 PM »
An update on the MixBuzz parts kit. I'm putting together a guide and aiming for a ~300 EUR price point. Interest?

4KCC parts kits in stock & all boards in stock.

ramshackles

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #105 on: December 15, 2018, 10:47:53 AM »
Happy Christmas all!
We are on holiday until the 27th.

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #106 on: January 26, 2019, 03:06:51 PM »
might not be the right place but..
i just finished one of my 2 Mibuzz500s and its all great unless im on the fastes(.1) release setting. if in this position, audio gets distorted. Any idea as to why?

Potato Cakes

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #107 on: January 28, 2019, 03:03:31 PM »
James,

I have some of your THAT VCA adapters and I was wondering if you knew if they needed to trimmed if using 2180 pre trimmed VCA's? Looking to install these in a GSSL I'm repairing.

Thanks!

Paul

duantro

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #108 on: April 17, 2019, 06:21:41 PM »
just ordered a 4kcc. Thanks man!

duantro

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #109 on: May 15, 2019, 06:20:58 PM »
Hey, I've tried to inquire at your store contact, and haven't heard back. Want to see if you've got an eta on the parts/ pcb? I've received the metal work from Frank already. I just want to avoid getting rigglered!


duantro

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #110 on: May 28, 2019, 12:07:20 AM »
Hello)))))))))? It's been 6 weeks since you've accepted my payment and haven't responded to multiple emails/ messages.
Edit: thanks for the email
« Last Edit: June 11, 2019, 07:14:45 PM by duantro »

jstark

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #111 on: October 15, 2019, 03:08:17 PM »
Paging ramshackles...

I find myself in the same boat as the previous poster, duantro.  I've had good luck with ordering from Ramshackle in the past, but it's been a month without any email or PM response from ramshackles.

Does anyone have a side channel to reach ramshackles?


David
not here for a long time. here for a good time.

Aleguitarpro

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #112 on: October 16, 2019, 01:23:47 AM »
I ordered on December 2018 4 sets of ssl 4kcc.
One of the "meter" pcb contain an error, that it's no easy to correct due to the soldering on the boards of the meters driver ICs.
I tried to desolder the parts from PCB to fix it  but the pcbs (especially the pads) are not high quality to accept rework.
They seems to be cheap PCBs from China (jlc pcb, dirtypcb etc...)
I tried to contact Ramshackle many times to have a spare pcb or to order a new set.
Nothing after more than 10 months.
It's only to share my personal experience.

duantro

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #113 on: October 16, 2019, 11:10:44 AM »
I finally got a response after emailing him a few times. My pair of 4kcc parts showed up, and I'm happy. What is the meter board pcb error Aleguitarpro? I'm almost at that stage.

spunky

Re: Ramshackle Audio's DIY Shop - Igor's projects and more
« Reply #114 on: November 06, 2019, 05:33:06 AM »
Great store, everything is sold out