1176 (hairbal) Rev D Calibration step 3 no drop, on any of the 4 ratio settings

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

maxathys

New member
Joined
Apr 16, 2014
Messages
4
Okay, so I passed the calibration step 1 & 2.  But I have no drop in step 3. when I turn the attack button from off to fully CW nothing happens, (tested on the 4 ratio settings). I've triple checked the wiring. On the first eye the pcb looks fine too. Does someone know where to look? I've no idea where to look.
(the tracking trimpot works: tested with my DMM). So my compressor isn't compressing :/

+ is it normal that i can actually hear the 1khz tone in the compressor when pushing the output and input? :)  (i think its the output transfo, not sure though)

thx in advance!!
 

Latest posts

Back
Top