Monitor attenuator with transformers

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

burn em

New member
Joined
Feb 1, 2014
Messages
1
Idea is to make a passive monitor controller from 2 position 25 pole switch => ganged pot => 2x 1:1 transformers.


Could I use 2x transformers after a ganged pot to rebalance line output to my monitors? I've had them inline for ages to kill a ground loop from the monitor out of my console, but  want to bypass the less than ideal circuitry of my consoles monitoring section.

I have 4 decent Marinair 1:1 transformers that were originally from a mic splitter.

a nice 25 x 2 pole switch I can use to flip between console and stereo converter outs

The pot I can replace with a better one if the concept works ok.

Should I put 2 more transformers before the ganged pot?
 
Back
Top