Fabio's CANIL class A driver rev2 pcb documentation anyone?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rob Flinn

Well-known member
Joined
Jun 3, 2004
Messages
5,207
Location
Between Sussex, UK & Aude, France.
Does anybody have documentation that goes with the pcb Fabio Bauman designed that is a Neve class A driver.    It's a 2 1/2" square pcb that looks like it's probably just the output stage of a BA283 with the T03 2N3055.
 
I know this is an old thread but I am looking for documentation for this pcb too. For instance: minus R2, resistors start at R14. Yeah.  Does anyone know if this is a copy of the ba283 and could I work backwards to figure it out?
 
Rocinante said:
I know this is an old thread but I am looking for documentation for this pcb too. For instance: minus R2, resistors start at R14. Yeah.  Does anyone know if this is a copy of the ba283 and could I work backwards to figure it out?

Yes, it's the output half of a BA283.  See attched pdf for the diagram
 

Attachments

  • neveout_sch.pdf
    18.6 KB · Views: 22

Latest posts

Back
Top