[mics]

Are the inner layer holes at an angle?

Hi Matt. 

Nice observation but they're not at an angle. It is a specialised bevelling process I apply to the capsules during the production stage. 

I got the idea from an old red ck12 that I rebuilt. It was done this way and simply sounded more precise front to back than any other I had previously heard.

[Matt Nolan]

Are the inner layer holes at an angle?

Hi Matt. 

Nice observation but they're not at an angle. It is a specialised bevelling process I apply to the capsules during the production stage. 

I got the idea from an old red ck12 that I rebuilt. It was done this way and simply sounded more precise front to back than any other I had previously heard.

Fascinating. Thanks Ben.

[Veronica Sneesby]

Hi, we are happy to be able to offer you a C12 microphone build. Using the high quality Australian made microphone body, a circuit, Capsule, PSU, Mount and Leads.

Here is a link to the page for this microphone: http://beesneezmics.com/diy-microphone-range/beesneez-diy-microphone/beesneez-c12-diy-body-kit.html

[Murdock]

Hey Veronica or Ben,

I wanted to ask, if you know if I would have to pay customs when ordering capsules from you to either Belgium or Germany?
Probably yes, but I wanted to be sure...

Greetings,
Merlin

[mics]

Hi Marlin, thanks for your customs question.

Unfortunately, customs charges are at the mercy of the receiving nation.  We price the invoice accordingly and the rest is up the them.

Thanks.

Ben

[Veronica Sneesby]

Its the end of financial year in Australia so we have put all our in stock DIY items on sale to clear the shelves.
https://www.beesneezmicrophones.com.au/store/index.php

[micaddict]

Plus it's in Aussie dollars, folks.

[mics]

Hi all.

The M49 body kits are ready to roil out the door. 

Please see the feeler thread for details.

Cheers

[Veronica Sneesby]

Hi all.

The M49 body kits are ready to roil out the door. 

Please see the feeler thread for details.

Cheers

I think you mean roll dear! 

[Glutamatjunkie]

I'm roiling, roiling, roiling 

[Rlucas41]

Hi all.

The M49 body kits are ready to roil out the door. 

Please see the feeler thread for details.

Cheers

i can't find the feeler thread, interested in the m49 body kits... can you give me details please?

[Recording Engineer]

https://groupdiy.com/index.php?topic=62902.0

[RPC360]

Hi Matt. 

Nice observation but they're not at an angle. It is a specialised bevelling process I apply to the capsules during the production stage. 

I got the idea from an old red ck12 that I rebuilt. It was done this way and simply sounded more precise front to back than any other I had previously heard.

Interesting! The CK12 capsule that's taken apart at the Austrian Audio blog appears to have all the holes bevelled, too.

[mics]

Interesting! The CK12 capsule that's taken apart at the Austrian Audio blog appears to have all the holes bevelled, too.

Yes your are right. There have been at least a dozen different versions that i have measured and repaired over the last 16 years.

Cheers

[mics]

Hi All.

Just a quick message to let you all know we now have transformers available that we have hand wound in our factory.

Not Chinese made;

Bv8
Bv11
Bv12

$69usd each or $50usd in a group buy of 50pcs min.

Cheers.

Ben

[Larsson]

Hi ben and Veronica,
I just received the K7 capsule and b-bv08 capsule after a long wait. Seems like shipping from Australia to Sweden can take a very long time Is there a schematic/ pin out diagram for the B-bv08 transformer?
Thanks alot!
/Mats

[jrmintz]

Hi Ben,

Just so you know, I used your K7 capsule in a DIY FET47 and it sounds stunning. Big, clear, and rich. I couldn't be more pleased.

Thank you!

[bremusound]

Hi All.

Just a quick message to let you all know we now have transformers available that we have hand wound in our factory.

Not Chinese made;

Bv8
Bv11
Bv12

$69usd each or $50usd in a group buy of 50pcs min.

Cheers.

Ben

Are these still available?

Best,
Dirk