Stereo Linking 1176 Clones

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

idylldon

Well-known member
Joined
Jun 6, 2004
Messages
562
Location
Idyllwild, CA
I've just finished up a dual 1176 unit in one box and was wondering if anyone has successfully used them linked. If so, how did you go about it? I've read the threads I could find, but never found any follow-up to the posts that mentioned trying to link them.

Thanks,
--
Don
 
Works great. The best thing to do is make sure your FET's are all reasonably well matched, then tie point 7 from both units together via a SPST switch.

Dean
 
yup, it's simple as that. If your FET's are not tracking well, build a small box like the 1176SA stereo adapter (yes, there is a schematic somewhere around)

Jakob E.
 
Thanks, guys. I used closely matched FETs on both boards, so it should work out fine once I hook up the 7s.

If not, I do have that schematic around somewhere for the UREI linking box.

Cheers,
--
Don
 

Latest posts

Back
Top