News:

Happy New Year!


Built custom channel for Soundcraft Boards (SSL like)
« on: March 17, 2016, 08:44:56 AM »
Dear Soundiyer,

Since a couple of day i'm working on a project (still prototyping and testing).
I would like to build custom channel for my Soundcraft 600 series. The goal is to get a more complete channel wit parametric EQ, gate, high end Mic pre, phase swith, all aux pots and more.
The thing is that i would like this channel could be use in other Soundcraft console like 6000, 8000, 200B, 400... that people who want one could use it in our console.
So if anybody there got one of this console, i need faceplate channel dimension, only external size not complete holes positions ;).

So what about the channel:
-Mic pre should be Neve or Studer 169 (i don't know now, tell me what you think about that)
-Usual LINE, PHASE, +48v button
-A Gate like the D&R gate. Quite simple and do the job quite well
- Low pass and HighPass filter with variable frequency: the one of the Lafond chroma is perfect
-Four Band or Three band depend on the faceplate size: Inspired by the Sontec M250 made by Igor
- Six auxiliary. Each could pre or Post
-Big know for mute and solo like the one on SSL board
-Complete routing by relay with possibility to switch element order like EQ before Gate...
-8 to 24 busses routing depending which console you get.
-Penny gilles 100mm fader to replace ALPS one.

The project is to build a complete PCB who can match with different Soundcraft consoles or others...
I got lot of contact in electronic industry like PCB manufacturer, Pot manufacturer, Faceplate printer... so it will not be a big deal to make 100pcs of this Channel. The thing is that i need to know if you are in ?, cause it's a big project and i will be very happy to get your opinion and share experiences about Audio DIY.


Cost know: I think a complete channel (knobs, transformer, pots, faceplates) should be around 300€ . The most expensive parts are transformer and mechanical parts like relay, switches, knobs...

So waiting for your back if you got one soundcraft console like 6000, 8000, 200B, 400 series i need dimension first and schematic to compare busses connectors.

 :)

« Last Edit: June 30, 2016, 02:28:06 PM by xarolium »


Re: Built custom channel for Soundcraft Boards
« Reply #1 on: March 25, 2016, 10:09:00 AM »
I have a Soundcraft TS-12. Would be really cool if it could work with it, and I'd be interested for sure!

Re: Built custom channel for Soundcraft Boards
« Reply #2 on: May 02, 2016, 11:51:44 AM »
Hi,

Delta/Venue compatibility would be great.
I could supply measurements and pinout of the ribbon cable.


iprovlek

Re: Built custom channel for Soundcraft Boards
« Reply #3 on: May 03, 2016, 07:28:14 AM »
Im In!

I have Soundcraft 200b and always try to do it something with this mixer!

Studer 169 Pre will be great for it, I have Studer 169 preQ from Audiox and sound great!!!


I have manual for Soundcraft 200b I can send it to your mail!!!


And everything is in it!!!

r2d2

Re: Built custom channel for Soundcraft Boards
« Reply #4 on: May 04, 2016, 06:15:50 AM »
hi
so nice project ,

considered must compete with various options
i found around googling about consoles ,

like a guy that sell soundcraft 3200 kit parts for sidecar desk ,
http://forum.analogconsole.com/viewtopic.php?f=25&t=2319
that include: channels strips , pcbs , power supply , metal parts , cables , vu meters, etc..
for very good price ,
like for a kit that include :
16ch strips+pcbs+1 power supply+16sifam vu meters with front metal plate,etc...
it ask around 1000 bucks ,

other options i found around the web are
neve v series full channel strip (pre+eq+comp-lim+busses+small fader)for around 400 bucks
and same or less for ssl 4000 ch strips
etc.....
r.

Dear Soundiyer,

Since a couple of day i'm working on a project (still prototyping and testing).
I would like to build custom channel for my Soundcraft 600 series. The goal is to get a more complete channel wit parametric EQ, gate, high end Mic pre, phase swith, all aux pots and more.
The thing is that i would like this channel could be use in other Soundcraft console like 6000, 8000, 200B, 400... that people who want one could use it in our console.
So if anybody there got one of this console, i need faceplate channel dimension, only external size not complete holes positions ;).

So what about the channel:
-Mic pre should be Neve or Studer 169 (i don't know now, tell me what you think about that)
-Usual LINE, PHASE, +48v button
-A Gate like the D&R gate. Quite simple and do the job quite well
- Low pass and HighPass filter with variable frequency: the one of the Lafond chroma is perfect
-Four Band or Three band depend on the faceplate size: Inspired by the Sontec M250 made by Igor
- Six auxiliary. Each could pre or Post
-Big know for mute and solo like the one on SSL board
-Complete routing by relay with possibility to switch element order like EQ before Gate...
-8 to 24 busses routing depending which console you get.
-Penny gilles 100mm fader to replace ALPS one.

The project is to build a complete PCB who can match with different Soundcraft consoles or others...
I got lot of contact in electronic industry like PCB manufacturer, Pot manufacturer, Faceplate printer... so it will not be a big deal to make 100pcs of this Channel. The thing is that i need to know if you are in ?, cause it's a big project and i will be very happy to get your opinion and share experiences about Audio DIY.


Cost know: I think a complete channel (knobs, transformer, pots, faceplates) should be around 300€ . The most expensive parts are transformer and mechanical parts like relay, switches, knobs...

So waiting for your back if you got one soundcraft console like 6000, 8000, 200B, 400 series i need dimension first and schematic to compare busses connectors.

 :)
..... Cracking D.Vader Firewall ...  II-)

Re: Built custom channel for Soundcraft Boards
« Reply #5 on: June 18, 2016, 06:01:50 PM »
I have a Soundcraft TS-12. Would be really cool if it could work with it, and I'd be interested for sure!

Gilbert,
Could you measure the size of the channel faceplate on your TS12? i would like to know if it fit with 600 channel.
Do you have also schematic of it?

Im In!

I have Soundcraft 200b and always try to do it something with this mixer!

Studer 169 Pre will be great for it, I have Studer 169 preQ from Audiox and sound great!!!


I have manual for Soundcraft 200b I can send it to your mail!!!


And everything is in it!!!

Same thing for you iprovlek.
Could you tell me channel faceplate dimension of the 200B ? i already have schematics ;)

Hi,

Delta/Venue compatibility would be great.
I could supply measurements and pinout of the ribbon cable.



Same thing too. Dimension and schematics if you got it ?


So i have got some more precise idea:
-Mic amp will be Amec mozart
-a dedicated line amp based on modern OPA design (like OPA1642...)
-Comp/Gate will not fit on the channel (not enough space)
-EQ will be 3 complete parametric (lafond audio labs Chroma) + HF and LF variable
-6 aux with 6 potentiometers (SC600/500, Delta, TS12 all have 6 aux so no problem with buss connector only 200B have 4 aux...)
First prototype should be ready quite soon ;)


Re: Built custom channel for Soundcraft Boards
« Reply #6 on: June 21, 2016, 12:14:01 AM »
The faceplate for the TS12 channel is 1.5" x  25"
Here is a link to the schematic
http://soundcraft.com.s3.amazonaws.com/downloads/user-guides/TS12-User-Guide-1012.pdf

Re: Built custom channel for Soundcraft Boards
« Reply #7 on: June 25, 2016, 08:52:29 AM »
Here is what the channel will look like.
Any suggestions are welcome


The customs channel only use 8 busses as the TS12 has 12 busses so it will not match with or i could add two more routing switches...
« Last Edit: June 25, 2016, 09:03:08 AM by xarolium »

Re: Built custom channel for Soundcraft Boards
« Reply #8 on: June 30, 2016, 02:26:54 PM »
So. After a long reflection i decided to design a SSL channel like (without comp/gate due to channel size)
Mic pre will be SSL9K (the first one then SSL4K transformer mic pre).
EQ will be lafond audio labs chroma parametric EQ with a SSL mod (x3 and /3 frequency)
This channel will match with soundcraft 500, 600, 800, 6000, 8000, 200B.
So if you want to upgrade your soundcraft to an SSL like board let me know  ;)
Here is schematic (any advices are welcome) PFL and leds are missing on this schematic. I'm thinking to add Pan buffer OPA, a VCA instead of a simple fader, a FET switching between line an mic source and maybe a FET switching for AUXes ...
Let me know what you think.

iprovlek

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #9 on: June 30, 2016, 03:19:00 PM »
Looks great Xarolium!!!

If you can add any kind of compreesor on it, IM IN!!!
 8) 8) 8)


Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #10 on: July 01, 2016, 03:34:15 AM »
Looks great Xarolium!!!

If you can add any kind of compreesor on it, IM IN!!!
 8) 8) 8)

Thing is that the soundcraft channel is not enought big. Solution => Add the HL4000 compressor on channel insert ;)

iprovlek

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #11 on: July 01, 2016, 02:52:31 PM »
Great Xarolium!!!
 ;D

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #12 on: October 28, 2016, 07:42:17 AM »
Hi everybody,

I come back with some news of my customs soundcraft 600 channel named e906.
i just receive the panels and it look great (Panel dimension is 483mm x 34mm). I'm still waiting for the PCBs .
Tell me if you still are interested about this custom channel that i can update PCBs to match your soundcraft console
Attached picture are schematic, PCBs and panel pictures.
Schematic comment are welcom !
Enjoy ;)





Rocinante

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #13 on: October 28, 2016, 02:24:01 PM »
Wow. That's really impressive. Like all of it. Good job man, damn.  I unfortunately use a Ghost but this is a real treat for 600 owners.
If there's a harder way to do this, I haven't found it yet.

gato

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #14 on: October 28, 2016, 02:31:58 PM »
What pcb program is that?

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #15 on: October 28, 2016, 03:24:30 PM »
Where is "like" button!?   :o
Age Of Leviathans

Humner

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #16 on: October 28, 2016, 04:19:17 PM »
wow, that looks great. Where did you get the metal work done?

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #17 on: October 29, 2016, 12:09:47 PM »
Where is "like" button!?   :o

I use CadSoft Eagle to design PCBs

wow, that looks great. Where did you get the metal work done?

I contact a China manufacturer who made me 16pcs as sample before mass production (if someone want channels)

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #18 on: January 03, 2017, 05:09:38 AM »
hi

awesome project

ive been modding out my sc 6000..

but this looks even more awesome !!!

im in for a few channels if this is possible :)

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #19 on: January 04, 2017, 12:52:23 PM »
hi

awesome project

ive been modding out my sc 6000..

but this looks even more awesome !!!

im in for a few channels if this is possible :)

I finally get the PCB's, five pieces at the moment. I'm still looking for the dual Gang 2,5kohm Mic gain potentiometer.
I will post picture of the PCB soon. Stay tune !

How many channel you need ?