Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #40 on: February 13, 2018, 10:19:19 PM »
Hey-

I'm interested in this as well, for a 200b. Do you still need dimensions or any other info? I'd love it if you could make some pcbs for the 200b. Keep us posted!


q2audio

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #41 on: April 27, 2018, 04:37:57 PM »
Would this fit a Soundcraft Delta 200? I seem to think the channels are a little narrower in the Delta than the 600. If the length was suitable I could get metalwork done.

Nice work!

SIXTYNINER

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #42 on: May 22, 2018, 02:21:35 PM »

…..I decided to update a little bit the channel and add some option like  24 busses, Group input and Mute/Solo control and group via MIDI or with a  "rebuild" master channel…….


… Wow ….  :o :o :o
..a mirage joke of the desert , or  true tangible reality ?

.." Xarolium" …hmm …  ::) ….sound like a so powerful revitalizing drug  :o :o :o
The Resurrector of  old mixing desk ,( "p.T.g.m." - porn Technology genetically modified……)

 :o :o :o

midi mute option ( as also available in origin for the 600 desk )
would be the ("available") naked hot Playmate ready on the bed  ;D ;D ;D

are you thinking to do / adapt channel strips also for old Allen & Heat , Soundtracs (similar to Soundcraft), Amek , desks ?

and master bar with balanced insert and transformer output ?

ps:
Compliments for the "Nava".
« Last Edit: June 05, 2018, 12:28:55 PM by SIXTYNINER »
>>" 1 Picture say what billions words cannot "<< - >>"SMD Kill the DIY STAR"<<
Why in the  forum  if no share

mflemi

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #43 on: May 31, 2018, 01:22:41 PM »
Xarolium, I would like at least two of your e906 channels for the SC 600.  What do I need to do to make that happen?
« Last Edit: May 31, 2018, 02:54:03 PM by mflemi »

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #44 on: June 08, 2018, 06:39:00 AM »
Also interested in some more info on this project.

r2d2

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #45 on: June 26, 2018, 09:55:56 AM »

W o w   :o

what a project !

still available ?
..... Cracking D.Vader Firewall ...  II-)

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #46 on: July 09, 2018, 07:41:57 PM »
The preamp is the SSL9K  but with a LM394 instead of a MAT-02 and it works like a charm.

MAT-02 is obsolete anyways... you could use MAT-12 which is its successor
http://www.analog.com/en/products/analog-functions/matched-transistors/mat12.html#product-overview

this is one of the most interesting and impressing projects around here!
I don't even have a SC 600 but I could look for a faulty one and fully upgrade it.
It seems really worth it  8) :D
« Last Edit: July 09, 2018, 07:46:42 PM by echoplex »

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #47 on: October 26, 2018, 12:56:51 AM »
Very interested in a couple of these if they are still available! Would be for an 800b.

Whoops

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #48 on: October 27, 2018, 10:04:33 PM »
MAT-02 is obsolete anyways...

MAT02 are still easy to source

plimousse

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #49 on: October 28, 2018, 06:33:27 AM »
Hi,
Nice project and work.
Still available ?

Cheers,
Pascal


Thro

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #50 on: October 28, 2018, 07:02:30 AM »
Hi, nice build! :) ;)
Would these boards fit a Soundcraft 200B aswell?

walt384

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #51 on: January 29, 2019, 04:37:00 PM »
Hi,
Nice job !
Would be interested for a soundcraft 8000
Thx

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #52 on: February 02, 2019, 01:20:51 PM »
First thank you for your support.

This project is in stand by cause i sold my SC600 and buy an Soundtracs Jade.
But if some of you are still interesting to get this customs channel i can make a run of 100 pcbs + potentiometers + faceplate (for SC600 or other Soundcraft board).
Let me know

Best regards,
xarolium

Thro

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #53 on: February 04, 2019, 07:41:06 AM »
That'll do, even if its just the pcb+faceplate    ::)

Wiebee

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #54 on: February 09, 2019, 01:26:18 PM »
Yes please! I would be highly interested in a few strips for an 8000. I love the work you did! Great job! If measurements are needed or anything else, please let me know \m/

mokkinger

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #55 on: March 15, 2019, 06:21:48 AM »
Hey, this project looks very cool, and I would love to also take a few strips.
I have a Soundcraft 6000 with 24 Busses, will the strip fit in the 6000 as well?

thanks,
Mark
still learning to fly...

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #56 on: July 29, 2019, 02:47:49 PM »
I’d be up for retooling this 200b, are these still being made?

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #57 on: August 03, 2019, 07:34:52 PM »
I would take 16 channels if available

romeojesus

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #58 on: August 19, 2019, 10:55:58 AM »
I wish this project would be picked up again...

seriously interested to add some of these channels to my soundcraft venue II if possible !!!

best

christian

Re: Built custom channel for Soundcraft Boards (SSL like)
« Reply #59 on: August 19, 2019, 11:23:23 AM »
any chance we could get the Gerber files for these boards? or even the CAD eagle files? I'm sure there are plenty of us who would love to pick this up where xarolium left off with this awesome project :)