Built custom channel for Soundcraft Boards (SSL like)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Would this fit a Soundcraft Delta 200? I seem to think the channels are a little narrower in the Delta than the 600. If the length was suitable I could get metalwork done.

Nice work!
 
xarolium said:
…..I decided to update a little bit the channel and add some option like  24 busses, Group input and Mute/Solo control and group via MIDI or with a  "rebuild" master channel…….

… Wow ….  :eek: :eek: :eek:
..a mirage joke of the desert , or  true tangible reality ?

.." Xarolium" …hmm …  ::) ….sound like a so powerful revitalizing drug  :eek: :eek: :eek:
The Resurrector of  old mixing desk ,( "p.T.g.m." - porn Technology genetically modified……)

:eek: :eek: :eek:

midi mute option ( as also available in origin for the 600 desk )
would be the ("available") naked hot Playmate ready on the bed  ;D ;D ;D

are you thinking to do / adapt channel strips also for old Allen & Heat , Soundtracs (similar to Soundcraft), Amek , desks ?

and master bar with balanced insert and transformer output ?

ps:
Compliments for the "Nava".
 
Xarolium, I would like at least two of your e906 channels for the SC 600.  What do I need to do to make that happen?
 
xarolium said:
The preamp is the SSL9K  but with a LM394 instead of a MAT-02 and it works like a charm.

MAT-02 is obsolete anyways... you could use MAT-12 which is its successor
http://www.analog.com/en/products/analog-functions/matched-transistors/mat12.html#product-overview

this is one of the most interesting and impressing projects around here!
I don't even have a SC 600 but I could look for a faulty one and fully upgrade it.
It seems really worth it  8) :D
 
First thank you for your support.

This project is in stand by cause i sold my SC600 and buy an Soundtracs Jade.
But if some of you are still interesting to get this customs channel i can make a run of 100 pcbs + potentiometers + faceplate (for SC600 or other Soundcraft board).
Let me know

Best regards,
xarolium
 
Yes please! I would be highly interested in a few strips for an 8000. I love the work you did! Great job! If measurements are needed or anything else, please let me know \m/
 
Hey, this project looks very cool, and I would love to also take a few strips.
I have a Soundcraft 6000 with 24 Busses, will the strip fit in the 6000 as well?

thanks,
Mark
 
I wish this project would be picked up again...

seriously interested to add some of these channels to my soundcraft venue II if possible !!!

best

christian
 
any chance we could get the Gerber files for these boards? or even the CAD eagle files? I'm sure there are plenty of us who would love to pick this up where xarolium left off with this awesome project :)
 

Latest posts

Back
Top