News:

Happy New Year!


Majestic12

This will be the official support thread for the stereo insert pcb sold by Wayne Kirkwood from KA Electronics

http://www.ka-electronics.com/kaelectronics/MS_Matrix/MS_Matrix.htm



Description and documentation soon to be added.


tekno808

This will be the official support thread for the stereo insert pcb sold by Wayne Kirkwood from KA Electronics

http://www.ka-electronics.com/kaelectronics/MS_Matrix/MS_Matrix.htm



Description and documentation soon to be added.

Nice, i was searching for something like this .... still no description and documentation info ?

Grtzzz,

Danny.

Cubase 7.02,RME HDSPe RayDAT + Sonic Core 2xA16Ultra.
PM670,MixBuzz1,GSSL,Sontec M250EP,Art VLAII Pro.

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #2 on: September 03, 2016, 10:47:31 AM »
I just got 2 switcher cards!     and want then in the same box as KA's  stereo widener.      How would you say its is best to power it all?
the switcher card run at +24dc     and draw about 125ma when all active       both around 250ma.      then the stereo board requires
+/-15volts.       how best to cleanly power that bad boy.    HELP PLEASE.

Sal
Hotmouth Records.           

ruffrecords

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #3 on: September 03, 2016, 02:37:05 PM »
Why isn't the guy who sells it supporting it?

Cheers

Ian

Majestic12

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #4 on: September 03, 2016, 05:23:49 PM »
Why isn't the guy who sells it supporting it?

Cheers

Ian

It actually is my design that is sold by Wayne from KA electronics. I will write some information about it soon, I totally forgot about it here in the forum.
Everybody who needs help can  also use the forum at the KA electronics website .

ruffrecords

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #5 on: September 03, 2016, 05:55:17 PM »
Why isn't the guy who sells it supporting it?

Cheers

Ian

It actually is my design that is sold by Wayne from KA electronics. I will write some information about it soon, I totally forgot about it here in the forum.
Everybody who needs help can  also use the forum at the KA electronics website .

Cool. That makes sense.

Cheers

Ian

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #6 on: February 10, 2017, 03:34:55 PM »
Is there any way of using this as a 2x mono insert switcher with independent switching?

Rocinante

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #7 on: February 13, 2017, 08:37:17 AM »
I'd go out on a limb and say yeah but it would be wayyy overkill.  Have you checked out diy-tubes take on the igor bypass switch?  Majestic actually made a bunch too iirc.  They are single channel but used 'in reverse' could be used as insert switches.
If there's a harder way to do this, I haven't found it yet.

Majestic12

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #8 on: February 13, 2017, 08:57:08 AM »
Is there any way of using this as a 2x mono insert switcher with independent switching?

Not in an easy way. The relais for L and R channels are all wired in series and switched together. You would have to cut a lot of traces to make these pcbs work in mono.

Re: [BUILD] Stereo Mastering Insert Switcher PCB - Official Support Thread
« Reply #9 on: February 13, 2017, 10:33:02 AM »
Thought so. Thanks!