zebra50

Edited 20th October 2020

Hi!

Once again I am in the process of clearing up my work space and making space and raising funds for some new projects. Sensible and insensible offers considered.

I will post at what it costs me.  Some of the things are heavy but generally I can send most things within the UK for £12, and Northern Europe for £20. Please ask for rates around the world.


YAMAHA SPX90 EFFECTS UNIT



Classic early digital rack mounted effects unit as heard on pretty much everything recorded in the late 1980s. Tested and working. £100

More pictures at http://xaudia.com/shop_item/yamaha-spx90-effects-unit-st027/


STUDIOMASTER UFEX DUAL STEREO COMPRESSOR



Twin stereo compressors. That is 4 channels of VCA compression for £100 plus post.
Working but the left input gain pot is scratchy - you may want to replace that.

More pictures at http://xaudia.com/shop_item/studiomaster-ufex-dual-stereo-compressor-st025/


DIGITECH / DOD DSP128 DIGITAL MULTI-EFFECTS UNIT



Late 1980’s multi effects unit. Tested and working. This has massive boomy hall reverbs plus multi-tap delays and other assorted effects. £100 plus post.

More pictures at http://xaudia.com/shop_item/digitech-dod-dsp128-digital-multi-effects-unit-st026/


MARSHALL SLAVE AMP 200 FOR SPARES/REPAIR



Marshall slave amplifier. Not working, for spares or repair. £100 plus post.

More pictures at http://xaudia.com/shop_item/marshall-slave-amp-100-st022/


ROCKTORCH SA31 SPECTRUM ANALYSER FOR SPARES/REPAIR



RockTorch signal analyser, not working, for spares or repair. £15 plus post.

More pictures at http://xaudia.com/shop_item/rocktorch-sa31-spectrum-analyser-st023_rocktorch/


SE ELECTRONICS TUBE MIC FOR SPARES/REPAIR



SE tube mic, Not tested. £100 plus post.

The cable is bad and the oddball connector that mates with the microphone has some broken pins.
Includes power supply, box and carry case. No shock mount. I'll send the broken cables too.
A lot of great donor here for a DIY tube mic project.

More pictures at http://xaudia.com/shop_item/se-electronics-z5600a-tube-condenser-microphone-st021/


CALREC CM10 CONDENSER MICS - working but noisy



Tested - working but noisy. £60 each plus post.
Pair of Calrec podium condenser microphones, they work and sound OK but too noisy (hiss) to sell as fully working. Hence selling as spares/repairs. To be honest it is a common problem with Calrec mics.
I have used these on snare drum where signal to noise is not an issue.
Nice cosmetic condition. XLR output. 48V phantom powered.

More pictures at http://xaudia.com/shop_item/calrec-cm10-condenser-mics-x398/


SPL HPM 500 SERIES HEADPHONE AMP 



Tested and working. £200 plus post.

More pictures at http://xaudia.com/shop_item/spl-hpm-500-series-headphone-amp-xhpm/


Oktava MKL5000 tube microphone set for repair



Not working.  £250 plus post.

Complete set with capsule, bottle, power supply and cable.
The problem may be in the body to capsule connections, but I am unsure.
I bought this to fix but I mostly just do ribbon mics now.
Price reflects its non-workingness. There are a few on ebay at >£700.

More pictures at http://xaudia.com/shop_item/oktava-mkl5000-tube-condenser-microphone-x377/


Apart 100v to 8 ohm speaker transformers
For PA system. £5 each + post. I have at least 4 of these.



More photos at http://xaudia.com/shop_item/apart-t20ip-speaker-matching-transformers-st015/


FREE! I don't know what this is!
Looks like some kind of rack mounted monitor, but all the speakers are missing. Some nice meters and other parts inside. If you pay postage then you can have it. FREE! Otherwise it will go to the tip. :-(



More photos at http://xaudia.com/shop_item/amu-gb1-d-i-dont-know-what-this-is-st009/


SOLD - ORBAN 424A GATE / COMPRESSOR / LIMTER - SOLD
More photos at http://xaudia.com/shop_item/orban-424a-gate-compressor-limter-st024/

SOLD - ALICE MIC AMP PAK 2 MIC PREAMPLIFIER - SOLD
More pictures at http://xaudia.com/shop_item/alice-mic-amp-pak-2-mic-preamplifier-st016/

SOLD - RFT CM7151 bottle mic, amplifier unit only, no capsule - SOLD
More photos at http://xaudia.com/shop_item/rft-cv-7049-tube-microphone-amplifier-only-x1109/

SOLD - Pile of spare parts from Phoenix Audio - SOLD
More photos at http://xaudia.com/shop_item/phoenix-audio-drs-4q-mic-pre-board-and-other-assorted-parts-st014/

SOLD - JS MATCHING TRANSFORMERS 1345 / 5037 - SOLD
More pictures at http://xaudia.com/shop_item/js-transformers-1345-5037-matching-transformers-st017/


I will list more things as and when I find them.

Please ask questions through the forum.

Stuff is located in the Republic of Yorkshire, UK.

As always I am open to offers, haggling, bribery, coercion, corruption, extortion, and blackmail.

Payment by paypal or I can send a card payment link.

Cheers!
Stewart
« Last Edit: October 21, 2020, 05:06:22 PM by zebra50 »
Ribbon microphone services
http://www.xaudia.com
Microphone blog


frans

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #1 on: April 05, 2016, 07:16:54 AM »
Stewart, your thing #1 seems to be floating. It's not the first time things on GDIY float.... why do you guys always power up with electricity from your showy antigravity generators....
Insert witty one-liner here

okgb

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #2 on: April 05, 2016, 09:17:07 AM »
If you look closely you can see a potato chip shaped like the Pope's 1st cousin in the wood grain
wild stuff ! You know if the Big guy likes tubes they gotta be good!
GKB Audio / Greg Boboski

zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #3 on: April 05, 2016, 01:07:04 PM »
WowI this is amazing.

Thomas has just bought Thing 1 and Thing 2, so he gets the magic floating Voodoo.

Party on!
Ribbon microphone services
http://www.xaudia.com
Microphone blog

AudioGimmer

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #4 on: April 06, 2016, 06:29:32 AM »
Hi Stuart
What are the other dimensions of that console type case?


zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #5 on: April 06, 2016, 12:19:01 PM »
Good question!
I'm at home now but will measure and report back tomorrow.
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog

zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #6 on: April 06, 2016, 05:19:00 PM »
Some more things added!
Ribbon microphone services
http://www.xaudia.com
Microphone blog

zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #7 on: April 07, 2016, 01:12:15 PM »
What are the other dimensions of that console type case?

I make it approximately 435 x 220 x 78 mm.

Cheers
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog

TubeMonkey

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #8 on: April 08, 2016, 08:36:51 PM »
I'd take thing #4.... any chance you'd be willing to ship across the pond? quote on shipping?

zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #9 on: April 09, 2016, 03:07:08 AM »
Hi Tube Monkey!

It's a few kg and I don't think it will be cheap to ship - maybe £30 or so. Can you please PM me your delivery address? I will try to get an accurate shipping quote for you once I have your post code.

Cheers
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog


s2udio

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #10 on: April 09, 2016, 09:34:21 AM »
Stewart ,Very Interested in the fostex......whats the estimated shipping UK?
« Last Edit: April 09, 2016, 01:51:18 PM by s2udio »
On the end of a Rural Twisted Pair.

zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #11 on: April 09, 2016, 02:14:56 PM »
Estimated around £11 by UPS... perhaps a touch more. It is rather heavy and bulky, but usually UPS move most things for £11.

Cheers
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog

zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #12 on: April 15, 2016, 05:18:41 PM »
A few bits sold and a few bits still available. Please make offers if you want anything!
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog

zebra50

Re: I'm clearing up the workshop - random stuff for sale.
« Reply #13 on: June 17, 2016, 04:22:42 PM »
I have added a couple more oddments.
Cheers!
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog

zebra50

Re: I'm clearing up the workshop - random stuff for sale (2020 update).
« Reply #14 on: October 06, 2020, 02:45:31 AM »
Hi! 4 years later and I am having another clear-out - more stuff added and more to come.
Hope you are all OK.
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog

TubeMonkey

Re: I'm clearing up the workshop - random stuff for sale (2020 update).
« Reply #15 on: October 06, 2020, 04:11:16 AM »
pm'd about RFT

Murdock

Re: I'm clearing up the workshop - random stuff for sale (2020 update).
« Reply #16 on: October 06, 2020, 06:24:09 AM »
Interested in two JS Transformers. PMd you.

Whoops

Re: I'm clearing up the workshop - random stuff for sale (2020 update).
« Reply #17 on: October 06, 2020, 01:28:39 PM »

I don't know what this is
Looks like some kind of rack mounted monitor, but all the speakers are missing. Some nice meters and other parts inside. If you pay postage then you can have it. Otherwise it will go to the tip. :-(



More photos at http://xaudia.com/shop_item/amu-gb1-d-i-dont-know-what-this-is-st009/

I can take that.
How much is the postage to Lisbon, Portugal?

Thank you so much

zebra50

Re: I'm clearing up the workshop - random stuff for sale (2020 update).
« Reply #18 on: October 06, 2020, 01:39:34 PM »
Hi Whoops!

Good stuff. It is yours. I'll get a postage quote for you tomorrow, but it is quite heavy and I would guess around £25.

Would you please PM or email your address to me so that I can get an accurate quote?
Thanks
Stewart
Ribbon microphone services
http://www.xaudia.com
Microphone blog

Whoops

Re: I'm clearing up the workshop - random stuff for sale (2020 update).
« Reply #19 on: October 06, 2020, 01:56:43 PM »
Hi Whoops!

Good stuff. It is yours. I'll get a postage quote for you tomorrow, but it is quite heavy and I would guess around £25.

Would you please PM or email your address to me so that I can get an accurate quote?
Thanks
Stewart

thank you

pm, sent


 

Related Topics

  Subject / Started by Replies Last post
0 Replies
1009 Views
Last post December 07, 2005, 03:42:17 PM
by JRE Productions
1 Replies
1387 Views
Last post November 07, 2008, 04:38:07 PM
by matta
10 Replies
2856 Views
Last post October 20, 2009, 07:26:00 PM
by Scodiddly
9 Replies
3650 Views
Last post May 11, 2013, 11:46:13 PM
by niklasni1