G-pultec strange output

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

febo2609

Member
Joined
Oct 2, 2016
Messages
23
Hi,
today I finish my G-pultec and it works fine but the output signal is very strange on oscilloscope.
On output XLR i have this signal.The bigger signal is on XLR  pin 3 ,and the smaller signal is on pin 2 XLR.
Is this OK signal or something is wrong.If I disconect the XLR wire from PCB and measure on transformer pins signal is the same.
 

Latest posts

Back
Top