Aluminium enclosure

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

johnheath

Well-known member
Joined
Jul 31, 2014
Messages
890
Location
Sweden
Hi all...

I am looking for aluminum enclosures for test building different stuff. I am thinking of a box that could be fully enclosed to which I can attach a front panel.

It is mainly a manufacturer that I am looking for... like Hammond or likewise.


Best regards

/John
 
BUD makes aluminum boxes, should be available digikey, mouser, etc.

You can also buy blank guitar chassis. Places like watts tube audio  and mojotone sell them
 
john12ax7 said:
BUD makes aluminum boxes, should be available digikey, mouser, etc.

You can also buy blank guitar chassis. Places like watts tube audio  and mojotone sell them

Thank you sir.

Yes, I have been thinking about blank guitar chassis but haven't found anything useful really... yet ;)

I will investigate the mentioned suppliers.

Best regards

/John
 
@L´Andratté

Thanks again... great site for many reasons.

Lots of stuff I normally use and some more... and cheaper than other sites I usually visit including Mouser.

Best regards

/John
 
I was going to say Bud or Hammond.  Of course, you can get stuff made, but buying off the shelf (esp if youre looking at small numbers) will be cheaper.
 
For the type of Chassis you are showing us, I also recommend a blank tube guitar amp chassis.
So in Europe that would be Tube Town

Maybe Banzai also
 
Back
Top