wmarden

Re: Feeler: Original style 1081 cases
« Reply #100 on: March 28, 2018, 04:16:30 PM »
I'm interested in a 2 unit rack mount option for the 1081's. But also am interested in a vertical 8 unit for the 1073/1084s... Looking good API!


API

Re: Feeler: Original style 1081 cases
« Reply #101 on: March 30, 2018, 02:43:42 PM »
Hi and thanks!
Not sure if i ever will be able to make a 2 unit rack for these, to much work i am afraid.
A 8 slot 1073/1084 would be easier to do once i have solved the connector thing.

API

Re: Feeler: Original style 1081 cases
« Reply #102 on: March 30, 2018, 02:46:17 PM »
Here is the link to the info/order thread.

https://groupdiy.com/index.php?topic=68585.msg873169#msg873169

Potato Cakes

Re: Feeler: Original style 1081 cases
« Reply #103 on: April 16, 2018, 07:38:22 PM »
Hi, Dennis,

Just checking in to see if any progress has been made on the new PCB design for your chassis.

Thanks!

Paul

API

Re: Feeler: Original style 1081 cases
« Reply #104 on: April 18, 2018, 03:06:53 PM »
Hi guys.

Sorry for the slow activity, have been busy with my normal job and family.
I will call my friend tomorrow to see what is going on with the pcb.

I still need a few orders before i can start production of the chassis, but hopefully soon!

Kid Squid

Re: Feeler: Original style 1081 cases
« Reply #105 on: January 06, 2019, 04:23:38 AM »
Hi API,

Any developments on the 1081 cases ?

Best,
Steve
It is not the same as 4+12, nor is it the same as 4+8, but 4+12 IS the same as 4+8+12....

http://www.facebook.com/LazyLizardLabs

Re: Feeler: Original style 1081 cases
« Reply #106 on: January 08, 2019, 06:48:58 PM »
I got pcb's with switches for sale...........a few more remaining.

API

Re: Feeler: Original style 1081 cases
« Reply #107 on: January 09, 2019, 02:15:22 AM »
Hi guys.

I am still here!
My life have  just been to busy with other things than DIY the last six months.
I am ready to set things in motion and have been for a while, but i just want to make sure that i have the time and funds to go through with it before i start.
I dont want this to turn into a mess, there is to much money involved and its a complicated process to make all the parts, so then iwould rather wait a little longer.
But again, they will be done!

wmarden

Re: Feeler: Original style 1081 cases
« Reply #108 on: January 10, 2019, 08:51:06 PM »
I've noticed the order thread has disappeared... Have I missed the boat?

Potato Cakes

Re: Feeler: Original style 1081 cases
« Reply #109 on: January 10, 2019, 11:56:20 PM »
As far as I'm aware, there is no boat yet.


ravachol

Re: Feeler: Original style 1081 cases
« Reply #110 on: December 05, 2019, 12:20:34 PM »
If there's a pre-order list, please add me to it, thanks —much obliged.

Ravachol +3 for metalwork, buttons, faceplate, transformer holders

Cheers, nice work! Kudos API :thumbsup:
Never say "potato" — but you can have one!

API

Re: Feeler: Original style 1081 cases
« Reply #111 on: December 05, 2019, 04:05:08 PM »
Hi guys.

Long time since i logged in here.
I am sorry that i never fulfilled this project in the past 2 years, but my life took another direction and i have built up a small business from scratch in another field, so that have taken all my time.

I do however still have plans to do these cases if there is interest.
I have all drawings ready and a great prototype and also all other things figured out.
But i cant say when i have the time and money to get it all going, but hopefully in the first half of 2020.

My main reason to not do it before was that i did not want to end up in a situation where i had takin in alot of prepayments and would not be able to deliver, or not to be able to pay my suppliers.
Its a big operatin with several suppliers and big money, so it was a risk i could not take then.

Hope to be back here soon again!

Re: Feeler: Original style 1081 cases
« Reply #112 on: October 14, 2020, 12:21:22 AM »
I would be interested in a case if they happen.

thanks