Transformers

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Peter de Wit

New member
Joined
May 31, 2017
Messages
1
I have got some Lunahl 1540 line input transfomers 1:1, 600 ohm.

Cann they be used to modify a electred asymetric mic to a symetric one?
 
Welcome here! (The name suggests that you are Dutch!  :D )

Just try it! If it will work depends on a lot of factors, such as the output impedance of the (asymmetric) electret microphone.
If the output impedance of the microphone is too high, you will lose low frequencies and level. Also distortion (added by the transformer) will be a bit higher.
As they say: "The proof of the pudding is in the eating"  ;)
 
Back
Top