Neve 8816 Style DIY Line Mixer Ideas or Schematics?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mickeytrees

New member
Joined
Jun 1, 2017
Messages
3
Hey folks,

Lately I've been getting into building DIY 500 series models from CAPI, and I'm slowly leaning towards using a line mixer in my set up, so that I can compile a modular setup of 500 series  preamps into one unit for a simple portable tracking set up. I was digging through some old threads, and there was some talk about a (since expired) blueprint by New York Dave and some boards sold by Jeff from CAPI (which I am having a hard time finding now on their website, mind you these aforementioned posts are around 7 years old). I was just wondering if any one could point me in the right direction of an 8816 style 16 channel line mixer DIY schematic or (and I doubt this exists) kit? Any or all help would be appreciated to point me in the right direction thank you!
 
I assume you're talking about the ACA summing: http://capi-gear.com/catalog/index.php?cPath=22_46

or the 500 series line amps?: http://capi-gear.com/catalog/index.php?cPath=22_117_120

There have been projects adding pan and fader front ends to the ACA. Probably close to what you're looking for. None of this is based on Neve line amps.
 

Latest posts

Back
Top