Any recommendations on where to get custom small enclosures made?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mbira

Well-known member
Joined
Jun 4, 2004
Messages
2,422
Location
Austin, TX
Hi folks,
I am wanting to have a steel enclosure made for an external power supply.  It will be a box that is 11"x6"x5" (roughly) and I want several custom holes cut in the top and the name of my business cut in the top-so it would be a CNC job I guess.  Anyone in the US able to recommend someone?  I looked at Protocase but it was like $300 for one.  I'm looking to get something made for $100 or less and I know that is possible because I have seen a few other people selling what I am wanting to make at around that price (small custom jobs).  It's a simple case with an XLR connector, IEC, and small meter and the holes on the top.

 

Attachments

  • Screen Shot 2017-06-06 at 11.44.23 AM.png
    Screen Shot 2017-06-06 at 11.44.23 AM.png
    295.4 KB · Views: 27

Latest posts

Back
Top