are these polystyrene caps good for mxl 603s mod?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jonkan

Well-known member
Joined
Jun 7, 2004
Messages
733
Location
Sweden
I cannot find any other polystyrene caps in sweden except these that might be suitable. Apparently I have to order at least ten, but I only need two, so before I shell out the money I was wondering if these might be good candidates for Gus mxl 603s mod?

Any thoughts?

edit: the link i posted doesnt work, so you have to manually search for the product number, which is 113-320. Just go to www.rsonline.se
, enter the number and press "SÖK". The top left corner.

The product info is in english,so dont be intimidated by the swedish on the frontpage. :wink:

thanks!
/Jonas
 
oops, sorry... I will try to fix it!

thanks for pointing it out jakob!

edit: anyone that knows how to link from RS? I cant figure it out.

Anyway, the productnumber for the cap is: 113-320

you should be able to manually search for it on their homepage www.rsonline.se

just enter 113-320 in the field on the top left and then press "SÖK".

/Jonas
 
problem solved!

I found some nice polystyrenes that probably will fit at farnell, yay!

Now im wondering,

will wima mks2 capacitors work good for the 0.22uf caps in Gus´s mxl 603s mod?

thanks for any help!
/jonas
 
[quote author="Jonkan"]edit: anyone that knows how to link from RS? I cant figure it out.
/Jonas[/quote]
You can't...
They choose the Broadvision product for their online-catalogue and CRM ordering facilities...
You can't link to a Broadvision session
 
Back
Top