Vac11
Well-known member
For sale 8x SSL9K5 full stuffed preamp boards. PCBs are from PCBGrinder.com (new for 22Euro without VAT) and are 500/51X series compatiable. Located in Czech republic, EU.
I used only good quality electronic parts from Mouser (Wima caps, That1646, NE5534, TL074, TL052....) as in original BOM from Bruno2000. Solid soldering work.
MAT02´s are from electrochronics eshop (member here on GDIY), not from Chinese sellers on Ebay.
For finish this project you only need potentiometers, frontpanels, 4 switch LEDs and final calibration.
I have in my 500 rack 3 of this amazing preamps. I originally built 11 pcs.Three is enough for my needs, so 8 have to go. I also need money for finishing another projects.
Pleas, give me a reasonable offer!!! I prefer sell a lot, but I can sell also pairs if needed...
PM me here on forum or send me an email!!!!
mildavaca(at)seznam(dot)cz
Thanks!
Milan
PS: it is DIY, so I cant offer guarantee.
I used only good quality electronic parts from Mouser (Wima caps, That1646, NE5534, TL074, TL052....) as in original BOM from Bruno2000. Solid soldering work.
MAT02´s are from electrochronics eshop (member here on GDIY), not from Chinese sellers on Ebay.
For finish this project you only need potentiometers, frontpanels, 4 switch LEDs and final calibration.
I have in my 500 rack 3 of this amazing preamps. I originally built 11 pcs.Three is enough for my needs, so 8 have to go. I also need money for finishing another projects.
Pleas, give me a reasonable offer!!! I prefer sell a lot, but I can sell also pairs if needed...
PM me here on forum or send me an email!!!!
mildavaca(at)seznam(dot)cz
Thanks!
Milan
PS: it is DIY, so I cant offer guarantee.