madreza
Well-known member
Hi guys !
I ve copied a PCB , and as a beginer , I 'm having problems !
my biggest problem being the ground
when I measure resistance between 2 ground point on the original , I get something around 0.7ohms ( as on my bare pcb )
but while I solder everything I get 6.8Mohms !!!!
what's wrong in there ?
Thanks helping me out
I ve copied a PCB , and as a beginer , I 'm having problems !
my biggest problem being the ground
when I measure resistance between 2 ground point on the original , I get something around 0.7ohms ( as on my bare pcb )
but while I solder everything I get 6.8Mohms !!!!
what's wrong in there ?
Thanks helping me out