burdoto

Poctop D67 PSU, AMI T67 trany, ELA M251 Clone New
« on: July 28, 2019, 01:15:52 PM »
D67 PSU Already built according to the Poctop's guide and using his Mouser cart. The metalwork is from Collective cases.  Functioning properly and used many times. I was building some other mic PSUs for other mics from scratch and thought I would whip up a more compact version of the U67 PSU so I do not need this one anymore.  Comes with the 7pin XLR connector I disconnected from the mic cable i was using previously.

Sold

T67 microphone transformer from AMI. Was installed in my D67 clone but I swapped it out for the Sennheiser replacement part. I did not  think it was a good idea to desolder it from Poctop's pcb so it is mounted to the pcb. Nothing wrong with the transformer.

Sold

Functioning ELA M251/C12 Clone built with a Nady TCM 1150 Body and PSU. Peluso CEK-12, 3U Audio GZT-12 transformer, GE 5-star 6072a tube. Comes with mount. Head Basket replaced with C12 style headbasket from studio 939. Caps in Psu Replaced and voltage regulators added to both B+ and heater circuits. Components in mic are point to point layout. Mic cable replaced with Redco cable and Neutrik connectors because the chinese cable was problematic. The XLR panel connectors on the psu have not been replaced. Polar Pattern controlled from the PSU via rotary switch using U49 circuit topology(including switch in mic which disconnects back diaphram).  Disconnecting the rear diaphram makes an audible difference when using the mic in cardioid. Whole setup comes in  cheap aluminum briefcase.  Selling because I decided to build another M251 with some different components and scratch built PSU and I don't need two.

$650 Shipped.

(I'll add more photos when the upload folder is not full)
« Last Edit: September 25, 2019, 07:36:38 AM by burdoto »


burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #1 on: July 28, 2019, 02:34:04 PM »
Pic

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #2 on: July 28, 2019, 02:37:00 PM »
Mic

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #3 on: July 28, 2019, 04:37:46 PM »
Mic inside

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #4 on: July 28, 2019, 04:38:57 PM »
M251 clone PSU
« Last Edit: July 28, 2019, 09:35:23 PM by burdoto »

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #5 on: July 28, 2019, 04:40:00 PM »
Insides mic

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #6 on: July 28, 2019, 04:42:44 PM »
Inside closer. Shows rear diaphram switch

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #7 on: July 28, 2019, 04:43:51 PM »
Mic Cable
« Last Edit: July 28, 2019, 09:36:03 PM by burdoto »

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #8 on: July 28, 2019, 04:45:45 PM »
M251 clone Psu
« Last Edit: July 28, 2019, 09:35:48 PM by burdoto »

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #9 on: July 28, 2019, 05:28:13 PM »
Case


burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #10 on: July 28, 2019, 09:38:11 PM »
D67 psu

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #11 on: July 28, 2019, 09:39:20 PM »
D67 psu

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #12 on: July 28, 2019, 09:41:33 PM »
D67 psu

burdoto

Re: Poctop D67 PSU, AMI T67 trany, ELA M251 Clone
« Reply #13 on: September 12, 2019, 07:06:12 AM »
Bump. Prices lowered


 

Related Topics

  Subject / Started by Replies Last post
10 Replies
2365 Views
Last post January 02, 2006, 08:46:28 AM
by asm
7 Replies
4222 Views
Last post January 29, 2014, 05:59:13 AM
by gary o
47 Replies
7234 Views
Last post March 09, 2019, 04:50:29 PM
by Matador
5 Replies
1327 Views
Last post May 09, 2018, 02:16:58 PM
by Zebra_PD