[poctop]

I'd love to be in for one kit on the next batch, if they aren't all spoken for.

Thanks!

Pmed,
best,
Dan,

[mesajoe]

Dan,

I'd be up for two in the next batch, if there is space please.

Thx
Mark

[poctop]

Dan,

I'd be up for two in the next batch, if there is space please.

Thx
Mark

Pmed,
best,
Dan,

[vinylwall]

FLEA 48 with Dany's D47 headbasket assembly - perfect fit and works great:

[vinylwall]

Dany's D47 body assembly with a genuine Neumann U47 headbasket (serial #5084) - perfect fit and sounds great:

[vinylwall]

Fabulous job on this kit Dany!!!!  It was a joy to build and it sounds AMAZING.  I built the VF14 style kit.  I have a new Telefunken VF14K as well as a vintage VF14 (non-M).  With the Theirsch Red-line (mylar) capsule and AMI's BV08C Classic transformer.

Here is a folder full of pics of my build:

http://www.vinylwall.com/D-47VintageBouchard/

[lkipod]

Mine is ready also with Phaedrus vf14m

How does it sound?
Any annoying noise problems?
Cheers
Moshe

[TLRT]

How does it sound?
Any annoying noise problems?
Cheers
Moshe

Hi, No noise problems, it sounds great! Use proper star-grounding in the PSU and join 0V and screen to the mic body.

[mattmartin831]

I'd love to order one of these when they are available again

[poctop]

I'd love to order one of these when they are available again

pm'ed
best,
Dan,

[tommypiper]

Looks very interesting.    

For the VF-12 / 14s, what transformers are currently available?  Is AMI still making theirs? 

[Lordward]

I'd be up for one!!!!!

[poctop]

pmed,
thanks,
dan,

[poctop]

Looks very interesting.    

For the VF-12 / 14s, what transformers are currently available?  Is AMI still making theirs?

yes they are but there is other option too the AMI BV8 classic if very popular  , i have three different PCB that supports alot of different transfomer as well,  haufffe,cinemag , and others ....
 best,
Dan,

[poctop]

hi Folks , for those who are building the mic , i have found that putting a small dab of epoxy on the contact tongue inside the headbakset eliminates a resonnance cause by it , as it might be confused with an Mbira instrument from africa,
also using a little dab of epoxy on the screw thats hold the tongue will prevent any shifting during years of operation ,



I am almost ready to release the third batch , i have prepared a little temporary webpage to checkout the offered options,
http://www.vintagemicrophonepcbkit.com/OrderD47.html

Best,
Dan,

[JessJackson]

havnt visited this forum in a minute but WELL DONE bro. Looking sweet!

[poctop]

havnt visited this forum in a minute but WELL DONE bro. Looking sweet!

yes i have done it the last minute you were off  this site ,
 
BEst,
dAn,

[poctop]

Mechanical Mic  kits are back in stock,
Matt Head Style is Now Available Limited Qty initial run

D47 Mechanical Kit

For the First Time U48 is also available in limited Qty initial run

U48 Mechanical Kit





Best
Dan

[vinylwall]

Dany, you make the most beautiful kits out there!  Second to none.

[rockinrob86]

If I built an EF47 kit, with the power supply, would I be able to use that power supply with the EF version of this?  I am wondering about the pattern switching, since this has it on the microphone

ribbon mic:xvlk solution/DIY hall probe /plz elaborate

Started by ToobieSnack « 1 2 » Drawing Board

DIY some solution

Started by malkjos The Lab

Best PSU solution for 2 SCA preamps in a diy chassis?

Started by filthyrich33 The Lab

WTB: u47 parts / AMI 47 kit Body or other Body kit, bv8 / Neumann k47/49 capsule

Started by liveplaylove Black Market