1073-1066-1084 cases new batch
« on: February 04, 2018, 05:20:17 AM »
Ok guys , here is the deal.I am working on new 1073 frames batch , and if I reach certain very high number of units , price can go down to 130 eur for frame with front.
1066-1073-1084
So to make that price possible I need at least 60-70 "preorderd" frames.
If you are seriosly interested, please write number here , or contact me on PM.
https://groupdiy.com/index.php?topic=67470.msg857048#msg857048

WMARDEN                 4  X 1084  x? board sets
MOLTENWOK           4 X 1073    plus boards      vertical
                                             4 X 1084    plus boards       vertical
                                             2 X 2254    metalwork plus boards
UBXF                                2X 1073
TIMJAG                           8x1073    plus boards-vertical front print
                                               
RECORDING ING     4X1084      plus boards
WINETREE                    4 X 1084 cases plus boards
59FLAME                       4 X 1084 cases plus boards  vertical
ARNOLDLAYNE         1X1073 + boards   
                                               1x1084 +boards
SALOMANANDER     8X1073 + boards
DESUN                               2x1084 + boards vertical
THESTUDIO                    8X1084 vertical
AUDIOHAMMER       2X1084 + PCB
« Last Edit: April 12, 2018, 06:18:19 AM by sasarist »


wmarden

Re: 1073-1066-1084 cases new batch
« Reply #1 on: February 04, 2018, 04:04:54 PM »
If the price is 130 euros, you can put me down for 4 1084.

Re: 1073-1066-1084 cases new batch
« Reply #2 on: February 04, 2018, 04:45:09 PM »
If the price is 130 euros, you can put me down for 4 1084.

Ok, you are in circle of trust.😀

moltenwok

Re: 1073-1066-1084 cases new batch
« Reply #3 on: February 06, 2018, 01:15:05 AM »
Yup at 130 I'm down for 4 1073 and  4 1084 please

alexc

Re: 1073-1066-1084 cases new batch
« Reply #4 on: February 06, 2018, 02:20:29 AM »
I'd like to be part of the fun on some 73 or 84 case action, but where does one get some pcbs to suit?
 
Two would be good and four even better!

CHeers! That was my 2000th post  :)   My how 15years flys by quick!
« Last Edit: February 06, 2018, 02:57:33 AM by alexc »
I ping therefore I am

Re: 1073-1066-1084 cases new batch
« Reply #5 on: February 06, 2018, 03:26:40 PM »
I'd like to be part of the fun on some 73 or 84 case action, but where does one get some pcbs to suit?
 
Two would be good and four even better!

CHeers! That was my 2000th post  :)   My how 15years flys by quick!
I also stock pcb-s and populated B-Cards.Btw some guys ask for pictures of build in progress and finished wiring so:










https://www.facebook.com/Beebird-134032270616116/

MagnetoSound

Re: 1073-1066-1084 cases new batch
« Reply #6 on: February 06, 2018, 04:40:09 PM »
Do you offer the faceplates in the vertical pattern?
Dan

I don't think people realize what an embarrassment of riches this place is   -  Paul Gold

Re: 1073-1066-1084 cases new batch
« Reply #7 on: February 06, 2018, 04:50:33 PM »
Do you offer the faceplates in the vertical pattern?
Yes, just specify.IO73-66-84, horizontal or vertical.

wmarden

Re: 1073-1066-1084 cases new batch
« Reply #8 on: February 07, 2018, 02:37:26 AM »
Great work on those frames! You should come up with a wiring "how to" for the 1073 & 1084's for some of us non trained circuit bangers.

Also, how much for a set of pcb's for the 1073/1084's?

Re: 1073-1066-1084 cases new batch
« Reply #9 on: February 07, 2018, 03:22:50 PM »

Also, how much for a set of pcb's for the 1073/1084's?

40eur set if they go with frame, 50eur alone IO73-84 and IO66 sets


djn111

Re: 1073-1066-1084 cases new batch
« Reply #10 on: February 07, 2018, 04:39:13 PM »
Hi,

I will P'm you.

You sneaked in  a 2254 picture ....

DJN

wmarden

Re: 1073-1066-1084 cases new batch
« Reply #11 on: February 07, 2018, 04:51:52 PM »
40eur set if they go with frame, 50eur alone IO73-84 and IO66 sets

Cool! I'll need a couple sets of 1073 boards  in addition to the 1084 frames and boards.

moltenwok

Re: 1073-1066-1084 cases new batch
« Reply #12 on: February 08, 2018, 01:17:36 AM »
Sweet so I'm in for vertical mount;
4 times 1073 plus boards
4 times 1084 plus boards
2 times 2254 metalwork plus boards
Waiting to hear back from my mate for 10 frames for his bcm10.
Cheers johnny

Recording Engineer

Re: 1073-1066-1084 cases new batch
« Reply #13 on: February 08, 2018, 12:07:56 PM »
Hey I might know someone who may be interested... Curious how much to expect the remaining of parts to cost per channel; very-rough range.

Re: 1073-1066-1084 cases new batch
« Reply #14 on: February 08, 2018, 01:35:57 PM »
Hey I might know someone who may be interested... Curious how much to expect the remaining of parts to cost per channel; very-rough range.

Well, good question ;)
most expensive are rotary switches and transformers
from the head:
transformers AML  150eur
inductors          AML   60 eur
switches      Blore E. 160 eur
caps , resistors etc.    50 eur

so , in the end of day it become real deal . I produce them comercialy in small quantities and with right parts and PSU they can easily sound better than many others, if not all ,availible in the market.Put in vintage Marinaers , Motorola 2n3055 and you are in 70thies.

ubxf

Re: 1073-1066-1084 cases new batch
« Reply #15 on: February 09, 2018, 07:53:00 AM »
I would be interested in 2 1073 frames with horizontal faceplate  at that price
Thank you
« Last Edit: March 15, 2018, 10:29:07 PM by ubxf »

Re: 1073-1066-1084 cases new batch
« Reply #16 on: February 10, 2018, 04:26:56 AM »
List is added in my first post-top of the page.

cheers

wmarden

Re: 1073-1066-1084 cases new batch
« Reply #17 on: February 11, 2018, 10:29:54 PM »
After these are made, how about a DIY for an eight slot rack with 48v and trim...?

djn111

Re: 1073-1066-1084 cases new batch
« Reply #18 on: February 12, 2018, 05:26:23 AM »
H'mmmm

I like that as well as a project, I will look in to it if I have time to make that happen.

Dirk Jan

wmarden

Re: 1073-1066-1084 cases new batch
« Reply #19 on: February 12, 2018, 01:15:10 PM »
H'mmmm

I like that as well as a project, I will look in to it if I have time to make that happen.

Dirk Jan

I thought it was a good idea. Especially since yesterday, I just got outbid on eBay for a BAE rack...  :o And FYI, I'm a 3D Modeler/CAD designer by trade if you'd need any layout help.

Also for the 4x 1084's , I do need boards. And I might add 2x 1073's to that or, 1x 73 and 1x 84 + boards... Haven't decided yet.



 

Related Topics

  Subject / Started by Replies Last post
6 Replies
4998 Views
Last post September 01, 2007, 04:06:32 PM
by audioforge
83 Replies
30228 Views
Last post February 27, 2015, 06:31:35 AM
by r2d2
58 Replies
26545 Views
Last post July 18, 2010, 12:03:44 PM
by haima
34 Replies
8741 Views
Last post April 09, 2008, 12:46:15 AM
by Bluzzi