• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

1073-1066-1084 cases new batch

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sasarist

Well-known member
Joined
Dec 1, 2011
Messages
174
Ok guys , here is the deal.I am working on new 1073 frames batch , and if I reach certain very high number of units , price can go down to 130 eur for frame with front.
1066-1073-1084
So to make that price possible I need at least 60-70 "preorderd" frames.
If you are seriosly interested, please write number here , or contact me on PM.
https://groupdiy.com/index.php?topic=67470.msg857048#msg857048

WMARDEN                4  X 1084  x? board sets
MOLTENWOK          4 X 1073    plus boards      vertical
                                            4 X 1084    plus boards      vertical
                                            2 X 2254    metalwork plus boards
UBXF                                2X 1073
TIMJAG                          8x1073    plus boards-vertical front print
                                             
RECORDING ING    4X1084      plus boards
WINETREE                    4 X 1084 cases plus boards
59FLAME                      4 X 1084 cases plus boards  vertical
ARNOLDLAYNE        1X1073 + boards   
                                              1x1084 +boards
SALOMANANDER    8X1073 + boards
DESUN                              2x1084 + boards vertical
THESTUDIO                    8X1084 vertical
AUDIOHAMMER      2X1084 + PCB
 
I'd like to be part of the fun on some 73 or 84 case action, but where does one get some pcbs to suit?

Two would be good and four even better!

CHeers! That was my 2000th post  :)  My how 15years flys by quick!
 
alexc said:
I'd like to be part of the fun on some 73 or 84 case action, but where does one get some pcbs to suit?

Two would be good and four even better!

CHeers! That was my 2000th post  :)  My how 15years flys by quick!
I also stock pcb-s and populated B-Cards.Btw some guys ask for pictures of build in progress and finished wiring so:

2zrhwkp.jpg

eah5le.jpg

2yytenr.jpg

105aam9.jpg

29w8vav.jpg

263a23d.jpg

19ats1.jpg

ei2sjm.jpg


https://www.facebook.com/Beebird-134032270616116/
 
Great work on those frames! You should come up with a wiring "how to" for the 1073 & 1084's for some of us non trained circuit bangers.

Also, how much for a set of pcb's for the 1073/1084's?
 
wmarden said:
Also, how much for a set of pcb's for the 1073/1084's?

40eur set if they go with frame, 50eur alone IO73-84 and IO66 sets
 

Attachments

  • b-cards.jpg
    b-cards.jpg
    726.9 KB · Views: 85
Sweet so I'm in for vertical mount;
4 times 1073 plus boards
4 times 1084 plus boards
2 times 2254 metalwork plus boards
Waiting to hear back from my mate for 10 frames for his bcm10.
Cheers johnny
 
Recording Engineer said:
Hey I might know someone who may be interested... Curious how much to expect the remaining of parts to cost per channel; very-rough range.

Well, good question ;)
most expensive are rotary switches and transformers
from the head:
transformers AML  150eur
inductors          AML  60 eur
switches      Blore E. 160 eur
caps , resistors etc.    50 eur

so , in the end of day it become real deal . I produce them comercialy in small quantities and with right parts and PSU they can easily sound better than many others, if not all ,availible in the market.Put in vintage Marinaers , Motorola 2n3055 and you are in 70thies.
 
I would be interested in 2 1073 frames with horizontal faceplate  at that price
Thank you
 
H'mmmm

I like that as well as a project, I will look in to it if I have time to make that happen.

Dirk Jan
 
djn111 said:
H'mmmm

I like that as well as a project, I will look in to it if I have time to make that happen.

Dirk Jan

I thought it was a good idea. Especially since yesterday, I just got outbid on eBay for a BAE rack...  :eek: And FYI, I'm a 3D Modeler/CAD designer by trade if you'd need any layout help.

Also for the 4x 1084's , I do need boards. And I might add 2x 1073's to that or, 1x 73 and 1x 84 + boards... Haven't decided yet.

 
Back
Top