elskardio

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #40 on: March 10, 2019, 02:26:44 PM »
2 partial kits left.

After the BF-500 will be available assembled only.

Thanks
« Last Edit: July 05, 2019, 11:15:39 AM by elskardio »


elskardio

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #41 on: March 12, 2019, 06:28:47 PM »
All kits sold.

If you're interested in buying an assembled module please contact me. GroupDIY members gets a discount ;)

Thanks

elskardio

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #42 on: March 22, 2019, 10:14:06 AM »
Hi guys,

just to clarify... the Bump function only works with the default 12dB/oct slope.

Cheers

okgb

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #43 on: March 24, 2019, 09:22:42 PM »
If anyone doesn't their partial kit I'll take it off your hands!
thanks for taking this on !
GKB Audio / Greg Boboski

elskardio

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #44 on: March 24, 2019, 09:49:33 PM »
Hi Greg,
Your inbox is full...
Contact me by PM. I can arrange something for you.
Cheers

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #45 on: March 31, 2019, 08:00:59 PM »
Just wanted to give a big congratulations to Gabriel at Chambord Audio for developing this piece of kit- this was spectacularly designed, documented, and most importantly sounds great!  Those of you who haven't gotten around to building these yet are in for a treat- a huge amount of work went into these filters and it shows.

elskardio

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #46 on: April 01, 2019, 12:35:13 PM »
Just wanted to give a big congratulations to Gabriel at Chambord Audio for developing this piece of kit- this was spectacularly designed, documented, and most importantly sounds great!  Those of you who haven't gotten around to building these yet are in for a treat- a huge amount of work went into these filters and it shows.

Thank you Dan !
I'm glad you like the filters  ;)

elskardio

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #47 on: November 06, 2019, 11:14:40 AM »
Any interest in kits?

I might do a small batch in the following weeks.

Cheers

kante1603

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #48 on: November 06, 2019, 11:24:44 AM »
Any interest in kits?

I might do a small batch in the following weeks.

Cheers
Yes!

kante1603

Re: BF-500 // Butterworth Filters in 500 Format
« Reply #49 on: December 01, 2019, 11:57:41 AM »
So finally I received 4 kits and built them yesterday.
They´re just great.
Everything is nicely layouted,it´s clean,it does what you expect from it.
Big knobs,very nice front panel,indicators on every switch,everything fits like a glove.
I prefer good filters over eqs often if not most of times.
The "bump" amount can be changed with one resistor.
Congrats Gabriel,you did a great job!
I can recommend this build for beginners,you´ll have a great tool in your rack,better than most stomp boxes and the likes,simple and efficient.
I´m happy!


Best regards,


Udo.


Pic attached.
« Last Edit: December 01, 2019, 12:08:01 PM by kante1603 »


 

Related Topics

  Subject / Started by Replies Last post
155 Replies
25033 Views
Last post February 27, 2006, 02:05:19 PM
by gar381
5 Replies
1525 Views
Last post October 09, 2006, 09:19:49 AM
by kafka
485 Replies
154842 Views
Last post November 18, 2019, 03:53:39 AM
by manulaudic
0 Replies
209 Views
Last post September 19, 2019, 04:12:45 PM
by elskardio