abracadabradam
New member
- Joined
- Dec 4, 2014
- Messages
- 1
I have some of these lying around.
https://www.ebay.com/itm/Nickel-Permalloy-EI-35-Core-and-Bobbin-for-Transformer/230646735924?hash=item35b39de434:g:564AAOxy83JRGdBm
I have a lot of #34AWG.
Would i be able to wind a replacement for Lundahl LL5402 used in gpultec and g1176 with the above materials?
If so how do i calculate turns and winding structure.
What about a simpel input 600:600 transformer with the materials above: How would a turns schematic look for this?
Any help greatly appreciatted.
https://www.ebay.com/itm/Nickel-Permalloy-EI-35-Core-and-Bobbin-for-Transformer/230646735924?hash=item35b39de434:g:564AAOxy83JRGdBm
I have a lot of #34AWG.
Would i be able to wind a replacement for Lundahl LL5402 used in gpultec and g1176 with the above materials?
If so how do i calculate turns and winding structure.
What about a simpel input 600:600 transformer with the materials above: How would a turns schematic look for this?
Any help greatly appreciatted.