• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

FS: SYT-5 mic body

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dmp

Well-known member
Joined
Oct 28, 2009
Messages
3,829
Location
Madison, WI
Unused mic body from Chunger that I no longer need with shockmount
Includes markings and switches w/ pcb
$155
 

Attachments

  • IMG_20180401_112209.jpg
    IMG_20180401_112209.jpg
    102.8 KB · Views: 186
Is there something going on with the left front of the headbasket? It's not quite clear but from that first photo it looks like the mesh is kinda coming out a bit, up against the metal side bar.
 
Wordsushi said:
Is there something going on with the left front of the headbasket? It's not quite clear but from that first photo it looks like the mesh is kinda coming out a bit, up against the metal side bar.

Picture shows it pretty well. It looks like a little solder where the mesh meets the side. How I got it. 
 
Another picture from the side
 

Attachments

  • IMG_20180405_133051.jpg
    IMG_20180405_133051.jpg
    124.5 KB · Views: 73
I think it is the most recent version from Chunger - but I bought it a few years ago. I think most of it is brass but I'm not sure.
 
Back
Top