DIY Neve 1073 +EQ

Shields.

To me it looks like it is a screen.

Michael

Thanks!
U and P screen are connected to V?

mic input transformer need to be wired as 1:4?
line input transformer need to connect pins 9 to 10
and 7 to 8?
Thanks!

???

ilfungo said:

Thanks!
U and P screen are connected to V?

mic input transformer need to be wired as 1:4?
line input transformer need to connect pins 9 to 10
and 7 to 8?
Thanks!

Click to expand...

I'm not an expert, but trying to help.

Mic input transformer is connected to a switch for high impedance and low-impedance. So depends on using it as high (1k2ohm) or low (300ohm) input impedance. I suppose you're using carnhill vtb9045 transformers? If so:
- low impedance: connect pin 2 to 3, and 4 to 5
- high impedance: connect pin 4 to pin 3
in both cases pin 2 and 5 to xlr
also connect pin 8 and 9

Line input transformer:
- pin 9 to 10
- pin 7 to 8
- pin 3 to 4

Thanks wlinart!

Hi
It's possible to add a DI/IZ input to 1073?
thanks!

ilfungo said:

Hi
It's possible to add a DI/IZ input to 1073?
thanks!

Click to expand...

Yes, with the carnhill VTB9072 for example.

Ok
but it's possible without an additional transformer?
Thanks!

Yes, with something like this for example: https://www.jlmaudio.com/shop/fet-di.html?display_tax_prices=1

Thanks wlinart
But I'm searching a schematic for DIY version...

Search a little bit, and you can find a lot of options.
Here are a few:
- https://groupdiy.com/index.php?topic=2114.0 i think this one would be a great choice, since this is designed for a neve
- http://www.jensen-transformers.com/schematics/ schematic AS004, fet DI, i guess kind of similar to the JLM
- http://sound.whsites.net/project35.htm 3rd schematic, opamp based