hey fokls, my project for today is replacing the dead power transformer I have in an old rev d. 1176. I have a new avel lindberg torroid (model Y236107) to install and am not too sure how to do it. Has anyone ever installed one of these?
the transformer is marked as follows:
primary 2x115V
blue and grey
violet and brown
seconday
black (Ov) and red ((30V)
orange (0V) and yellow (30v)
the old 1176 has three wires on the secondary going to the rectifiers on the board. Im guessing I should be only using one half of the secondary, right? I should only be using one half of the primary for 110 operation or both together for 250, right?
thanks
dave
the transformer is marked as follows:
primary 2x115V
blue and grey
violet and brown
seconday
black (Ov) and red ((30V)
orange (0V) and yellow (30v)
the old 1176 has three wires on the secondary going to the rectifiers on the board. Im guessing I should be only using one half of the secondary, right? I should only be using one half of the primary for 110 operation or both together for 250, right?
thanks
dave